On 25.10.2014 02:09, poma wrote: > On 25.10.2014 01:31, Stephen Morris wrote: >> On 10/25/2014 01:09 AM, poma wrote: >>> On 24.10.2014 07:50, Stephen Morris wrote: >>>> I have plugged a digital camera into my usb port and mounted it using >>>> the popup displayed from the auto detect via konqueror (this annoys me >>>> as well). When konqueror is launched it displays the contents via >>>> Camera:/ which is okay, but subsequently I can't find any entries under >>>> /run that represent the camera. I assumed there would be a mount point >>>> under /run like there is for a usb flash disk. Given that there appears >>>> to not be a mount point under /run, where is it mounted in Fedora 20, so >>>> that I can point dolphin (which is what should be launched from the >>>> 'Open with File Manager' prompt, not Konqueror) at the mount point >>>> rather than having to manually type Camera:/ into the address bar. >>> ptp != usb_storage >>> >>> http://en.wikipedia.org/wiki/Picture_Transfer_Protocol >>> http://www.gphoto.org/proj/libgphoto2/ >>> >>> modinfo -d usb_storage >>> USB Mass Storage driver for Linux >>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/plain/drivers/usb/storage/Kconfig >>> >>> >>> poma >>> >> Thankyou for the links. I looked at those links which gave me a lot more >> information that I didn't know about. Unfortunately the documentation on >> libphoto2 seems to potentially be self conflicting. The list of cameras >> that libphoto2 supports seems to have my Nikon D3100 listed, but the >> list of cameras and how they are supported under Unix does not appear to >> list my camera. >> Following Cameron's email I checked the mount list which seems to >> indicate there is no mount point, which also coincides with the >> available device interface in the system tray not being able to unmount >> the camera before disconnection. >> Also now that I have changed to application preference order in the >> properties of the folder displayed by dolphin, whenever I select 'Open >> with File Manager' at device detection time the process correctly >> launched dolphin to display the contents, whereas yesterday when >> konqueror was the default application, manually pointing dolphin at >> Camera:/ would not display the contents of the camera because dolphin >> was trying to treat the camera as a usb device and couldn't acquire the >> usb. The only issue with dolphin is it doesn't display the folder name >> where the images are stored on the camera as the same name that the >> camera says it is, dolphin seems to be putting its own prefix on the >> folder name. >> Also dolphin seems to be starting at a higher point in the directory >> tree for its displays than where Windows starts. >> DigiKam now seems be displaying the files on the camera now as well, >> whereas yesterday it couldn't either, although digiKam doesn't >> understand the raw format files that I am taking with the camera. I >> could use jpeg images but that is not as good for image manipulation and >> corrections as raw is. I can process these files using the raw interface >> to Photoshop Elements and Elements itself, albeit under windows, so not >> being able to access these under Linux is not that big a deal to me, >> other than the fact that I have to use Windows. >> >> regards, >> Steve >> > > Does the Nikon D3100 supports USB mass storage mode? > http://goo.gl/7bGFuh > In this respect manual(D3100_EN.pdf) is questionable http://www.nikonusa.com/en/Nikon-Products/Product/dslr-cameras/D3100.html#tab-ProductDetail-ProductTabs-Support Therefore you can try this *if* the device supports both - PictBridge(PTP) & USB storage, and they collide: /etc/modprobe.d/usb_storage-quirks-Nikon_D3100.conf # Nikon D3100 # # lsusb # ID 04b0:0130 Nikon Corp. Coolpix 4600 (ptp) # ID 04b0:0427 Nikon Corp. # modinfo -p usb_storage # ... # quirks:supplemental list of device IDs and their quirks (string) # # 1. options usb_storage quirks=04b0:0130:i # # 2. # options usb_storage quirks=04b0:0427:i # # 3. # options usb_storage quirks=04b0:0130:i,04b0:0427:i # # *uncomment* only *one* of the three *options* that you'll *use* as the first case! Ref. - https://www.kernel.org/doc/Documentation/kernel-parameters.txt .. usb-storage.quirks= [UMS] A list of quirks entries to supplement or override the built-in unusual_devs list. List entries are separated by commas. Each entry has the form VID:PID:Flags where VID and PID are Vendor and Product ID values (4-digit hex numbers) and Flags is a set of characters, each corresponding to a common usb-storage quirk flag as follows: ... i = IGNORE_DEVICE (don't bind to this device); ... Example: quirks=0419:aaf5:rl,0421:0433:rc - https://www.kernel.org/doc/Documentation/usb/hotplug.txt - USB: add Nikon D300 camera to unusual_devs https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/usb/storage/unusual_devs.h?id=0047ca0 poma -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
