Re: connecting to a hardwired ethernet device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/02/2014 01:24 PM, Geoffrey Leach issued this missive:
This is a new Fedora 19 install.

The install correctly detected the ethernet port.

ifconfig sees em1, and the configuration data is correct

There is a device plugged into the port, which monitors its ethernet port. (The device is known to work otherwise)

So, somehow I'm supposed to specify the topology of the connection.

Any suggestions on how to go about debugging the connection?  Thanks.

Debugging how? I'd say the first thing is to use "ethtool em1" on the
Linux box to see if it sees a link and what configuration it's using.
On my machine, I still use "eth0", so:

[root@prophead ~]# ethtool eth0
Settings for eth0:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Half 1000baseT/Full
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Half 1000baseT/Full
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Link partner advertised link modes:  10baseT/Half 10baseT/Full
	                                     100baseT/Half 100baseT/Full
	                                     1000baseT/Full
	Link partner advertised pause frame use: Symmetric
	Link partner advertised auto-negotiation: Yes
	Speed: 1000Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: on
	Supports Wake-on: g
	Wake-on: g
	Current message level: 0x000000ff (255)
			       drv probe link timer ifdown ifup rx_err tx_err
	Link detected: yes

So you can see my NIC supports 10/100/1000baseT in both half and full
duplex. The switch it's plugged into (the "Link partner") supports the
same stuff and they both support auto negotiation. Between them they've
negotiated a 1000baseT connection (1Gbps) in full duplex and eth0 has
also determined that it is using twisted pair MDI-X (flipped) cabling
(swapping the TX and RX pairs in the cable) and the very bottom shows
eth0 has a link to the switch.

That'd be step one.
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital    ricks@xxxxxxxxxxxxxx -
- AIM/Skype: therps2        ICQ: 22643734            Yahoo: origrps2 -
-                                                                    -
-   Whoever said "Money can't buy friends" obviously never brought   -
-                        donuts to the office.                       -
----------------------------------------------------------------------
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org




[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux