Hi!
I tried to set up a system using four 3TB disks as a raid6. The disks
are new, no old partitions laying around. I used a USB stick as install
media (Fedora 20 x86_64 Gnome Live).
I chose manual partitioning to get everything as I wanted. When this was
ready I got the error message that I also needed a BIOS boot partition
(I gather that this due to being rather large disks). I tried to create
one of those, but it seemed to only be created on one of the discs in
the raid array, I wanted it created on all disks, just as the raid
partitions. This to be able to boot from any of the disks in the array
in case of a failure. As it is now, if the main disk dies, I can not
start the system at all.
Actually I ended up having three BIOS boot partition on the first disk,
being 2, 1, and 1 MB large. Which is quite annoying. But that's another
problem...
Before submitting a bug report/RFE on this. Is there anyone out there
that have done this, from anaconda? I.e. creating raid partitions and
BIOS boot partitions on ALL disks? If so, how did you do it?
Lars
--
Lars E. Pettersson <lars@xxxxxxxx>
http://www.sm6rpz.se/
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
