On 08/26/2014 06:05 PM, Tim wrote:
On Tue, 2014-08-26 at 12:10 -0600, jd1008 wrote:
It is a slider about 2mm or 2.5mm long and almost 1mm thick.
When in the up position (towards the corner which goes into the
controller) it is supposed to tell the controller write lock off
(disabled). But it is not working in my machine because some bloggers
say that the slider needs to protrude a little farther away from the
body of the sd card in order for the sensor to turn off (the
on-by-default) write lock.
I can't remember if you've already made a comment about trying this; but
have you tried putting a sticker around the card?
I tried 1 layer of tape over the lock slider. More than 1 layer
of tape makes the card too hard to insert into the slot. It really
is a very tight does not seem to provide much play root.
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
