On 2014-08-11 09:59, Joe Feely wrote:
Trying to install Fedora 20 to a replacement Kingston SSDNOW300V 120 GB SSD, from the live CD (Mate DE spin). The previous similar SSD died after 4 months excellent use. My hardware is a bundle consisting of:- Motherboard - Asrock FM2A75 Pro 4+ with CPU an AMD trinity A4 5300, and 2x2GB DDR3 RAM What's happening:- On starting the bios (UEFI) can see the SSD (even displays the S/N); within UEFI is the only time I can see the SSD. Fedora 20 live CD boots up ok (bar can't see the SSD), and following the option to install to hard drive it can't see any hard drive. (I tried with Linux Mint 16, and the same problem). A friend has successfully connected to the drive via an external SSD reader (connected by USB 3), and used a program "Partition wizard 8" to format it, and copy and read some files successfully (he was running Windows 7). Any ideas what I could try ?
Look in the firmware setup to see what drive options you have, look for whether it's attempting to set it up as a firmware RAID device.
And in any case boot the installer media again, get to a shell and capture and post the following: dmesg, /tmp/storage.log, lsblk. What you're describing doesn't sound like it's either partitioning or formatting related, the installer should see the device no matter how it's partitioned or formatted.
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
