On 07/22/2014 10:43 AM, poma wrote:
On 22.07.2014 16:24, Robert Moskowitz wrote:
On 07/22/2014 09:57 AM, Ed Greshko wrote:
On 07/22/14 21:49, Robert Moskowitz wrote:
On 07/22/2014 09:33 AM, Ed Greshko wrote:
On 07/22/14 21:22, Robert Moskowitz wrote:
But what file is this in now? /etc/sysconfig/network-scripts is a
mess now with scripts for each wifi connection and I can't find
any for my ethernet adapter.
Well, "ip link" will/should give a list of links.
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: p6p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether e8:9a:8f:8d:7b:56 brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq
state UP mode DORMANT group default qlen 1000
link/ether ac:81:12:9c:e0:95 brd ff:ff:ff:ff:ff:ff
But I cannot find a script file for p6p1. Perhaps it only exists
when the link is up, so where do I put this option?
Odd. First off, NO-CARRIER would suggest the link is not
connected. I just pulled the plug on one of my systems and I see....
Well this is on my notebook and the ethernet was not connected at the
time. So now it is plugged in via crossover to the server and link
is up.
[egreshko@f20f ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: p2p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 08:00:27:b7:04:4a brd ff:ff:ff:ff:ff:ff
But the config file still exists.
[egreshko@f20f ~]$ ls /etc/sysconfig/network-scripts/ifcfg-p2p1
/etc/sysconfig/network-scripts/ifcfg-p2p1
But still:
ls /etc/sysconfig/network-scripts/ifcfg-p*
ls: cannot access /etc/sysconfig/network-scripts/ifcfg-p*: No such file
or directory
Do you have access to the system to use the GUI tools of network
manager? (I'm assuming you are using nm).
I cannot see anyplace to specify use zeroconf if no dhcp.
This is gnome3 on F20...
:)
# file /etc/NetworkManager/NetworkManager.conf
/etc/NetworkManager/NetworkManager.conf: symbolic link to
`/etc/NetworkManager/conf.d/keyfile-plugin.conf'
# cat /etc/NetworkManager/conf.d/keyfile-plugin.conf
[main]
plugins=keyfile
[keyfile]
...
# file /etc/NetworkManager/NetworkManager.conf
/etc/NetworkManager/NetworkManager.conf: ASCII text
# cat /etc/NetworkManager/conf.d/keyfile-plugin.conf
cat: /etc/NetworkManager/conf.d/keyfile-plugin.conf: No such file or
directory
#cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=ifcfg-rh
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
