I had in the past followed the instructions in https://www.berrange.com/posts/2013/03/31/automated-install-of-fedora-18-arm-on-a-samsung-google-chromebook/ But I wanted to try to install fedora 20 and have a a simpler partition layout. In the process I found out a bit on how the system works. I first upgraded chrome os to get a new kernel (3.8.11) and copied the kernel partition, /lib/modules and /lib/firmware. I then got a f19 ssd image and booted from that. The usb boot being enable flag is stored in the internal flash. The flags listed in vboot_reference/firmware/lib/vboot_nvstorage.c are storred in the first 16 bytes of the disk. To clear chromeos and keep the machine booting from USB I did $ dd if=/dev/zero of=/dev/mmcblk0 Create a nvram.txt file with 7000000001000000000000000000003f The 1 in the middle is the usb boot flag. $ xxd -r -p nvram.txt nvram $ dd if=nvram of=/dev/mmcblk0 I then created 2 partitions, one for the kernel and one for the root. To get the kernel to boot, I checked firmware/lib/cgptlib/include/cgptlib_internal.h and noticed that what was needed was: Correct type: sgdisk -t1:7f00 /dev/mmcblk0 Setting attribute bits 48 and 56: sgdisk -A1:set:48 /dev/mmcblk0; sgdisk -A1:set:56 /dev/mmcblk0 Repack the kernel with vbutil_kernel and point it to the new root partition. I then got the fedora20 root image, extracted the files for / and replaced /lib/modules and /lib/firmware. I tried to get X running with both the armsoc and fbdev drivers, but so far no success, which is fine for me since I use the machine as an arm devboard. Cheers, Rafael -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org