On 18.06.2014 22:42, Temlakos wrote:
On 06/18/2014 04:37 PM, poma wrote:
On 18.06.2014 19:11, Temlakos wrote:
On 06/18/2014 12:05 PM, poma wrote:
On 18.06.2014 17:13, Temlakos wrote:
Everyone:
I have a three-year-old Dell Inspiron 1545. It came with the Dell
Wireless 1397 WLAN Mini-Card.
The current output of lspci -k |grep -iA5 wire gives "Dell Wireless
1397
WLAN Mini-Card" as a subsystem. The relevant kernel module is "ssb."
$ lspci -k |grep -iA5
Usage: grep [OPTION]... PATTERN [FILE]...
Try 'grep --help' for more information.
Currently this card will not connect. Nor can I force it to connect by
directly editing the network interface. I've tried several times,
but I
can't get to a MAC address for it.
What driver(s) or other kernel module(s) should I install, and
where can
I get them?
Broadcom has a 32-bit and a 64-bit tarball for what they say is a
driver
for this card. Should I install that on my system?
Please advise. It seems a shame to operate any laptop without wireless
connectivity.
Temlakos
The complete output of this command:
$ lspci -knn | grep -A100 Wireless
poma
The output, after a couple of module installations, now reads:
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb, wl
Still no wireless connection available on that laptop.
Temlakos
Whence is "wl"?
OK, to get to Vendor&Device ID, hit this command:
$ lspci -knn | grep -A10 BCM4312
Output could look like this:
<bus>:<dev>.<func> Network controller [0280]: Broadcom Corporation
BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Kernel driver in use: wl
Kernel modules: wl, ssb
"ssb" is a specific bus module, i.e. "Sonics Silicon Backplane driver"
Your "BCM4312" is attached to it.
BTW do you have the firmware installed?
poma
Earlier I installed the broadcom-wl and kmod-wl packages.
Output reads: 0c:00.0 Network controller [0280]: broadcom Corporation
BCM4312 802.11b/g LP-PHY [14d4:4315] (rev 01)
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb, wl
In that order.
Temlakos
So you are using the original Broadcom's module i.e. "wl",
http://www.broadcom.com/support/802.11/linux_sta.php
i.e.
http://download1.rpmfusion.org/nonfree/fedora/updates/20/SRPMS/repoview/wl-kmod.html
Is that right?
However something there is not quite bright!
The device is advertised as "broadcom", but if you are looking at hwdata databases i.e.
$ grep ^14e4 /usr/share/hwdata/pci.ids
14e4 Broadcom Corporation
$ grep ^14d4 /usr/share/hwdata/pci.ids
14d4 Panacom Technology Corp
"14d4" is not a Broadcom's vendor ID i.e. "14e4"
If your device is advertised with "proper" vendor ID i.e. "14e4" it "should" be supported by "b43" module,
http://wireless.kernel.org/en/users/Drivers/b43
And even with that, you should install the firmware,
http://wireless.kernel.org/en/users/Drivers/b43#Device_firmware_installation
$ man 1 b43-fwcutter
$ less /usr/share/doc/b43-fwcutter/README.too
http://wireless.kernel.org/en/users/Drivers/b43/developers
Perhaps the only problem is "wrong" vendor ID, but to conclude that you can play with the kernel's module source code or seek advice at http://wireless.kernel.org/en/users/Drivers/b43#Bug_reporting
&
http://vger.kernel.org/vger-lists.html#linux-wireless
poma
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
