On 11.06.2014 10:18, poma wrote:
On 11.06.2014 04:34, Richard Shaw wrote:
On Tue, Jun 10, 2014 at 6:09 PM, poma <pomidorabelisima@xxxxxxxxx> wrote:
Firmware, kernel module or userspace? :)
# uname -r
3.14.5-200.fc20.x86_64
No clue on firmware, I'm not exactly sure how to check which is being
loaded...
Did you mention an exact hardware in question?
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev
24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN
Flags: bus master, fast devsel, latency 0, IRQ 48
Memory at f0200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number c8-f7-33-ff-ff-f4-2d-ba
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
BTW how are you sure RF environment ain't changed?
Nothing new has come in or left the house since the problem...
Thanks,
Richard
- KERNEL:
$ curl -s https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.14.6 | grep iwlwifi
So pick up kernel-3.14.6-200.fc20.x86_64.rpm
http://koji.fedoraproject.org/koji/buildinfo?buildID=531773
You can also try with kernel-core-3.15.0-1.fc21.x86_64.rpm
http://alt.fedoraproject.org/pub/alt/rawhide-kernel-nodebug/x86_64/
- FIRMWARE:
$ modinfo -F firmware iwlwifi
# yum --enablerepo updates-testing install iwl6000g2b-firmware
$ rpm -qf /usr/lib/firmware/iwlwifi-6000g2b-6.ucode
iwl6000g2b-firmware-17.168.5.2-38.fc20.noarch
According to
http://wireless.kernel.org/en/users/Drivers/iwlwifi#Firmware
Intel® Centrino® Advanced-N 6235 goes with iwlwifi-6000g2b-ucode-18.168.6.1.tgz
i.e. iwlwifi-6000g2b-6.ucode
also stated within firmware itself:
https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/iwlwifi-6000g2b-6.ucode
"IWL.6000g2b.fw.v18.168.6.1.build.0"
However in Fedora it is packaged as "17" i.e. iwl6000g2b-firmware-17.168.5.2-38.fc20.noarch
However checksums are equal:
$ sha1sum /usr/lib/firmware/iwlwifi-6000g2b-6.ucode \
> /tmp/iwlwifi-6000g2b-ucode-18.168.6.1/iwlwifi-6000g2b-6.ucode
0c5dbfed5f50ef39b56827651f572bea25bfc27e /usr/lib/firmware/iwlwifi-6000g2b-6.ucode
0c5dbfed5f50ef39b56827651f572bea25bfc27e /tmp/iwlwifi-6000g2b-ucode-18.168.6.1/iwlwifi-6000g2b-6.ucode
So you are good to go with "17".
Josh, do these two firmwares should be in their own packages as "18"?
Intel® Centrino® Advanced-N 6235 - iwlwifi-6000g2b-ucode-18.168.6.1
i.e. iwlwifi-6000g2b-6.ucode - "IWL.6000g2b fw v18.168.6.1 build 0"
in iwl6000g2b-firmware-18.168.6.1-1.f$releasever.noarch.rpm
and
Intel® Centrino® Advanced-N 6205 - iwlwifi-6000g2a-ucode-18.168.6.1
i.e. iwlwifi-6000g2a-6.ucode - "IWL.6000g2a fw v18.168.6.1 build 0"
in iwl6000g2a-firmware-18.168.6.1-1.f$releasever.noarch.rpm
e.g.
- Intel® Centrino® Advanced-N 6235
1. Rename
iwl6000g2b-firmware-17.168.5.2-38.fc20.noarch
to
iwl6000g2b5-firmware-17.168.5.2-38.fc20.noarch
/usr/lib/firmware/iwlwifi-6000g2b-5.ucode
2. Create
iwl6000g2b6-firmware-18.168.6.1-1.f20.noarch.rpm
/usr/lib/firmware/iwlwifi-6000g2b-6.ucode
- Intel® Centrino® Advanced-N 6205
3. Rename
iwl6000g2a-firmware-17.168.5.3-38.fc20.noarch
to
iwl6000g2a5-firmware-17.168.5.3-38.fc20.noarch
/usr/lib/firmware/iwlwifi-6000g2a-5.ucode
4. Create
iwl6000g2a6-firmware-18.168.6.1-1.f20.noarch.rpm
/usr/lib/firmware/iwlwifi-6000g2a-6.ucode
poma
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
