Re: vncviewer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2 Mar 2014 at 13:38, Patrick Dupre wrote:

Date sent:      	Sun, 02 Mar 2014 13:38:32 +0100
From:           	"Patrick Dupre" <pdupre@xxxxxxx>
Subject:        	vncviewer
To:             	"Community support for Fedora users" 
<users@xxxxxxxxxxxxxxxxxxxxxxx>
> Hello,
> 
> When I try to connect to a fedora 20 machine (192.168.1.101) through
> vncviewer (both machine are on the same lan), I get TigerVNC Viewer
> for X version 1.1.0 - built Nov 22 2011 14:21:13 Copyright (C)
> 1999-2011 TigerVNC Team and many others (see README.txt) See
> http://www.tigervnc.org for information on TigerVNC.
> 
> Sun Mar  2 13:34:17 2014
>  main:        unable connect to socket: No route to host (113)
> 

I've been using vncserver and version since at least Fedora Core 3, and 
currently have it running on Fedora 20 in my classroom. Here are the results 
I see in the firewall setup I have and I start it via rc.local, but have used the 
systemctl option with 16, 17, and 18 in the past, but ran into some issue with 
20.

Contents of /etc/firewalld/services/vnc-server.xml

<?xml version="1.0" encoding="utf-8"?>
<service>
  <short>Virtual Network Computing Server (VNC)</short>
  <description>A VNC server provides an external accessible X session. 
Enable this option if you plan to provide a VNC server with direct access. The 
access will be possible for displays :0 to :3. If you plan to provide access with 
SSH, do not open this option and use the via option of the VNC 
viewer.</description>
  <port protocol="tcp" port="5900-5979"/>
</service>

Contents of /etc/firewalld/zones/public.xml

<?xml version="1.0" encoding="utf-8"?>
<zone>
  <short>Public</short>
  <description>For use in public areas. You do not trust the other computers 
on networks to not harm your computer. Only selected incoming connections 
are accepted.</description>
  <service name="ftp"/>
  <service name="mdns"/>
  <service name="vnc-server"/>
  <service name="dhcpv6-client"/>
  <service name="ssh"/>
  <port protocol="tcp" port="9000-9001"/>
  <port protocol="tcp" port="5979"/>
  <port protocol="udp" port="9000-9001"/>
</zone>


I start up the vncserver via /etc/rc.d/rc.local
USERNAME is my ID, and here I use port :79 which is 5979

runuser -l USERNAME -c 'vncserver :79 -geometry 1280x1024'

In the past I had used the systemctl option to set it up, but it was more 
complex, and with Fedora 20 it wouldn't restart like it would in previous 
version, so this is what I have found works best for me.

I have also used stunnel in the past on other machines that were accessed 
from outside to do the secure connections.  The ports 9000-9001 are for 
udpcast.




> 
> 
> ======================================================================
> =====
>  Patrick DUPRÉ                                 | |
>  email: pdupre@xxxxxxx Laboratoire de Physico-Chimie de l'Atmosphère
>  | | Université du Littoral-Côte d'Opale           | | Tel.
>   (33)-(0)3 28 23 76 12                   | | Fax: 03 28 65
>  82 44 189A, avenue Maurice Schumann                 | | 59140
>  Dunkerque, France
> ======================================================================
> ===== -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To
> unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of
> Conduct: http://fedoraproject.org/code-of-conduct Guidelines:
> http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question?
> Ask away: http://ask.fedoraproject.org


+----------------------------------------------------------+
  Michael D. Setzer II -  Computer Science Instructor      
  Guam Community College  Computer Center                  
  mailto:mikes@xxxxxxxxxxxxxxxx                            
  mailto:msetzerii@xxxxxxxxx
  http://www.guam.net/home/mikes
  Guam - Where America's Day Begins                        
  G4L Disk Imaging Project maintainer 
  http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+

http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned:  19,471
Processing time:  32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)

BOINC@HOME CREDITS
ROSETTA     11967029.746084   |   SETI        20406400.687492
ABC         16613838.513356   |   EINSTEIN    18415638.667648

-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org




[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux