1. try inserting the card after the reader is plugged in. 2. does the reader support sdhc cards (>2gb) and if no and the card is greater than 2gb it won't work. On Fri, Dec 6, 2013 at 10:25 AM, Kevin Wilson <wkevils@xxxxxxxxx> wrote: > Hello, > I have fedore 18. > When I insert an SD reader with an sdc card (SanDisk), I get the > following messages in syslog (however, fdisk -l or df -h do not show > the sd device, only one hard disk sata device): > > Dec 6 20:02:51 a kernel: [ 85.667051] usb 1-10: new high-speed USB > device number 4 using ehci_hcd > Dec 6 20:02:51 a kernel: [ 85.782821] usb 1-10: New USB device > found, idVendor=0cf2, idProduct=6230 > Dec 6 20:02:51 a kernel: [ 85.782828] usb 1-10: New USB device > strings: Mfr=1, Product=2, SerialNumber=4 > Dec 6 20:02:51 a kernel: [ 85.782835] usb 1-10: Product: UB623X > Dec 6 20:02:51 a kernel: [ 85.782840] usb 1-10: Manufacturer: ENE Flash > Dec 6 20:02:51 a kernel: [ 85.782845] usb 1-10: SerialNumber: 606569746801 > Dec 6 20:02:51 a mtp-probe: checking bus 1, device 4: > "/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10" > Dec 6 20:02:51 a mtp-probe: bus: 1, device: 4 was not an MTP device > Dec 6 20:02:51 a kernel: [ 85.839162] Initializing USB Mass Storage driver... > Dec 6 20:02:51 a kernel: [ 85.839472] scsi6 : usb-storage 1-10:1.0 > Dec 6 20:02:51 a kernel: [ 85.839643] usbcore: registered new > interface driver usb-storage > Dec 6 20:02:51 a kernel: [ 85.839646] USB Mass Storage support registered. > Dec 6 20:02:52 a kernel: [ 86.842137] scsi 6:0:0:0: Direct-Access > USB2.0 CardReader CF 0100 PQ: 0 ANSI: 0 > Dec 6 20:02:52 a kernel: [ 86.842601] scsi 6:0:0:1: Direct-Access > USB2.0 CardReader SM XD 0100 PQ: 0 ANSI: 0 > Dec 6 20:02:52 a kernel: [ 86.843504] scsi 6:0:0:2: Direct-Access > USB2.0 CardReader MS 0100 PQ: 0 ANSI: 0 > Dec 6 20:02:52 a kernel: [ 86.843992] scsi 6:0:0:3: Direct-Access > USB2.0 CardReader SD 0100 PQ: 0 ANSI: 0 > Dec 6 20:02:52 a kernel: [ 86.846126] sd 6:0:0:0: Attached scsi > generic sg1 type 0 > Dec 6 20:02:52 a kernel: [ 86.846453] sd 6:0:0:1: Attached scsi > generic sg2 type 0 > Dec 6 20:02:52 a kernel: [ 86.846805] sd 6:0:0:2: Attached scsi > generic sg3 type 0 > Dec 6 20:02:52 a kernel: [ 86.847157] sd 6:0:0:3: Attached scsi > generic sg4 type 0 > Dec 6 20:02:52 a kernel: [ 86.857981] sd 6:0:0:0: [sdb] Attached > SCSI removable disk > Dec 6 20:02:52 a kernel: [ 86.858993] sd 6:0:0:1: [sdc] Attached > SCSI removable disk > Dec 6 20:02:52 a kernel: [ 86.859994] sd 6:0:0:2: [sdd] Attached > SCSI removable disk > Dec 6 20:02:52 a kernel: [ 86.860979] sd 6:0:0:3: [sde] Attached > SCSI removable disk > > any ideas? > -- > users mailing list > users@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe or change subscription options: > https://admin.fedoraproject.org/mailman/listinfo/users > Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines > Have a question? Ask away: http://ask.fedoraproject.org -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
