Re: Error message that pops up in terminal windows.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19 Jul 2013 at 12:27, Steven Stern wrote:

Date sent:      	Fri, 19 Jul 2013 12:27:46 -0500
From:           	Steven Stern <subscribed-lists@xxxxxxxxxxxxx>
To:             	Community support for Fedora users 
<users@xxxxxxxxxxxxxxxxxxxxxxx>
Subject:        	Re: Error message that pops up in terminal 
windows.

> On 07/19/2013 12:16 PM, Michael D. Setzer II wrote:
> > This message shows up in terminal windows from time to time.
> > Any ideals on what is doing it and how to correct it.
> > 
> > WARNING: Your hard drive is failing
> > Device: /dev/sda [SAT], 1 Offline uncorrectable sectors
> > 
> > WARNING: Your hard drive is failing
> > Device: /dev/sda [SAT], 2 Offline uncorrectable sectors
> > 
> > smartctl shows the disk is fine in both short and long test on disk
> > and partitions. At one time the machine was reporting all kinds of
> > soft errors with smartctl, and I replaced the disk with this new
> > one, and it continued to get the soft errors. Then installed a pci
> > sata controller instead of the on-board controller, and errors
> > stopped? So, I assumed the issue was with the onboard controller,
> > and not the disk, since it was brand new, and had put the old disk
> > in another machine, and it also has no issues. But the above error
> > messages come up, and I would like to correct it, but don't know
> > what comand or program could resolve it.
> >   
> > 
> > 
> 
> Please post the output from smartcl -a /dev/sda

It is a long list, and the 2108 errors was the number listed under 
the old controller. No new errors were reported since changing the 
controller. 


smartctl 5.43 2012-06-30 r3573 [i686-linux-3.6.11-4.fc16.i686] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K1000.D
Device Model:     Hitachi HDS721010DLE630
Serial Number:    MSK523Y210UTUF
LU WWN Device Id: 5 000cca 37fce785b
Firmware Version: MS2OA650
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Jul 20 04:39:21 2013 ChST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 7216) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 121) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   080   080   016    Pre-fail  Always       -       1311407
  2 Throughput_Performance  0x0005   140   140   054    Pre-fail  Offline      -       76
  3 Spin_Up_Time            0x0007   112   112   024    Pre-fail  Always       -       203 (Average 206)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       26
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       4
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   108   108   020    Pre-fail  Offline      -       37
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       4498
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       26
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       33
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       33
194 Temperature_Celsius     0x0002   187   187   000    Old_age   Always       -       32 (Min/Max 25/39)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       4
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       160
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       1609

SMART Error Log Version: 1
ATA Error Count: 2108 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2108 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 ea 28 20 00  Error: ICRC, ABRT 1 sectors at LBA = 0x002028ea = 2107626

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 e3 28 20 e0 08      01:10:51.049  READ DMA
  c8 00 08 db 28 20 e0 08      01:10:51.049  READ DMA
  c8 00 08 d3 28 20 e0 08      01:10:51.049  READ DMA
  c8 00 08 cb 28 20 e0 08      01:10:51.049  READ DMA
  c8 00 08 c3 28 20 e0 08      01:10:51.049  READ DMA

Error 2107 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 31 f2 28 20 00  Error: ICRC, ABRT 49 sectors at LBA = 0x002028f2 = 2107634

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 23 28 20 e0 08      01:10:50.694  READ DMA
  25 00 80 63 3e 20 e0 08      01:10:50.660  READ DMA EXT
  c8 00 00 23 27 20 e0 08      01:10:50.505  READ DMA
  c8 00 00 23 26 20 e0 08      01:10:50.502  READ DMA
  c8 00 00 23 25 20 e0 08      01:10:50.500  READ DMA

Error 2106 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 da 1f 20 00  Error: ICRC, ABRT 1 sectors at LBA = 0x00201fda = 2105306

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 d3 1f 20 e0 08      01:10:49.714  READ DMA
  c8 00 08 cb 1f 20 e0 08      01:10:49.714  READ DMA
  c8 00 08 c3 1f 20 e0 08      01:10:49.714  READ DMA
  c8 00 08 bb 1f 20 e0 08      01:10:49.714  READ DMA
  c8 00 08 b3 1f 20 e0 08      01:10:49.714  READ DMA

Error 2105 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 37 f7 03 00  Error: ICRC, ABRT 1 sectors at LBA = 0x0003f737 = 259895

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 30 f7 03 e0 08      01:09:57.762  READ DMA EXT
  25 00 08 28 f7 03 e0 08      01:09:57.762  READ DMA EXT
  25 00 05 23 f7 03 e0 08      01:09:57.762  READ DMA EXT
  25 00 03 20 f7 03 e0 08      01:09:57.762  READ DMA EXT
  25 00 08 18 f7 03 e0 08      01:09:57.762  READ DMA EXT

Error 2104 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 0f b1 03 00  Error: ICRC, ABRT 1 sectors at LBA = 0x0003b10f = 241935

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 08 b1 03 e0 08      01:09:47.327  READ DMA EXT
  25 00 08 00 b1 03 e0 08      01:09:47.327  READ DMA EXT
  25 00 08 f8 b0 03 e0 08      01:09:47.326  READ DMA EXT
  25 00 08 f0 b0 03 e0 08      01:09:47.326  READ DMA EXT
  25 00 08 e8 b0 03 e0 08      01:09:47.326  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4393         -
# 2  Short offline       Completed without error       00%      4392         -
# 3  Short offline       Completed without error       00%      4392         -
# 4  Short offline       Completed without error       00%      4392         -
# 5  Short offline       Completed without error       00%      4355         -
# 6  Extended offline    Completed: read failure       80%      2580         311179552
# 7  Extended offline    Completed without error       00%      2316         -
# 8  Extended offline    Completed without error       00%         8         -
# 9  Short offline       Completed without error       00%         4         -
#10  Short offline       Interrupted (host reset)      90%         3         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


> 
> 
> -- 
> -- Steve
> -- 
> users mailing list
> users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have
> a question? Ask away: http://ask.fedoraproject.org


+----------------------------------------------------------+
  Michael D. Setzer II -  Computer Science Instructor      
  Guam Community College  Computer Center                  
  mailto:mikes@xxxxxxxxxxxxxxxx                            
  mailto:msetzerii@xxxxxxxxx
  http://www.guam.net/home/mikes
  Guam - Where America's Day Begins                        
  G4L Disk Imaging Project maintainer 
  http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+

http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned:  19,471
Processing time:  32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)

BOINC@HOME CREDITS
SETI        15467805.750086   |   EINSTEIN    12420999.979852
ROSETTA      7991573.921902   |   ABC         16163435.340645

-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org




[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux