Hi all, I need to have alias network interfaces. What is the desired way to do this in F19? My actual setup (without alias): [root@physics sysconfig]# ls network-scripts/ifcfg-* network-scripts/ifcfg-enp4s0 network-scripts/ifcfg-enp5s0 network-scripts/ifcfg-lo [root@physics sysconfig]# cat network-scripts/ifcfg-enp4s0 TYPE=Ethernet #BOOTPROTO=dhcp BOOTPROTO=none DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=enp4s0 UUID=4fd3476d-2423-4c26-99f9-28b5f6d18b05 ONBOOT=yes HWADDR=00:08:54:41:46:01 PEERDNS=yes PEERROUTES=yes IPADDR=172.16.0.1 PREFIX=16 [root@physics sysconfig]# cat network-scripts/ifcfg-enp5s0 DOMAIN="central.ucv.ro" IPV6_PEERDNS="yes" IPV6INIT="yes" UUID="df0a5629-9f3f-4c85-a5c0-ad72e8bbbbf6" IPADDR0="193.x.y.130" DNS1="193.x.y.254" PREFIX0="26" DEFROUTE="yes" IPV4_FAILURE_FATAL="yes" HWADDR="00:25:22:F9:71:3D" BOOTPROTO="none" IPV6_DEFROUTE="yes" GATEWAY0="193.x.y.129" IPV6_AUTOCONF="yes" IPV6_FAILURE_FATAL="no" IPV6_PEERROUTES="yes" TYPE="Ethernet" ONBOOT="yes" NAME="enp5s0" [root@physics sysconfig]# cat iptables # Custom file edited on 15-May-2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 25 -j ACCEPT -A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 110 -j ACCEPT -A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 143 -j ACCEPT -A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 443 -j ACCEPT #-A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 465 -j ACCEPT #-A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 587 -j ACCEPT #-A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 993 -j ACCEPT #-A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 995 -j ACCEPT -A INPUT -m conntrack --ctstate NEW -m tcp -p tcp --dport 2307 -j ACCEPT -A INPUT -p udp --dport 6277 -j ACCEPT -A INPUT -p udp --dport 24441 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j ACCEPT #-A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on 2013-05-20 15:23 *nat :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -s 172.16.0.0/16 -o p5p1 -j SNAT --to-source 193.x.y.130 COMMIT [root@physics sysconfig]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default g129.xxx.yyy 0.0.0.0 UG 0 0 0 p5p1 193.x.y.128 * 255.255.255.192 U 0 0 0 p5p1 172.16.0.0 * 255.255.0.0 U 0 0 0 p4p1 [root@physics sysconfig]# I need some addresses from local to be accessible from outside, so alias interface is needed. Not any local device knows other than basic routing. That is why I need another subnet, so alias. Let's say 193.x.y.162 from (placed) local visible from outside. (I can do it with F18/Centos, etc.) What is the desired/proposed way in F19? Using network instead NM failed (no name resolution) in my testing. Do I miss something? May I hope/wait for a fix in F19? Why the interface name is p5p1 and p4p1, different from ifcfg-enp5s0 etc.? Is anywhere explained this? In F18 docs there was a promise to have to choose between firewalld and iptables, not implemented until now (can be manually done but it is not trivial for anyone). C. Sava -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
