follows is a complete set of
tail -f /var/cups/log/error_log and tail -f /var/log/messages
done today may 16 2013, starting with manually turning printer off:
E [16/May/2013:10:03:59 -0700] Failed to update TXT record for Hewlett-Packard HP LaserJet 2200 @ F17sda10.pacbell.net: -2
also seen in tail -f /var/log/messages
May 16 10:03:59 F17sda10 kernel: [65839.750069] usb 2-1: USB disconnect, device number 3
May 16 10:03:59 F17sda10 kernel: [65839.750479] usblp0: removed
May 16 10:03:59 F17sda10 udev-configure-printer: Disabled printer ipp://localhost:631/printers/HP-LaserJet-2200 as the corresponding device was unplugged or turned off
May 16 10:03:59 F17sda10 systemd[1]: Service printer.target is not needed anymore. Stopping.
------------------
may16 turned printer on
E [16/May/2013:10:11:59 -0700] Failed to update TXT record for Hewlett-Packard HP LaserJet 2200 @ F17sda10.pacbell.net: -2
tail -f /var/log/message
May 16 10:11:57 F17sda10 kernel: [66317.894041] usb 2-1: new full-speed USB device number 4 using uhci_hcd
May 16 10:11:57 F17sda10 kernel: [66318.069983] usb 2-1: New USB device found, idVendor=03f0, idProduct=0217
May 16 10:11:57 F17sda10 kernel: [66318.069992] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 16 10:11:57 F17sda10 kernel: [66318.069997] usb 2-1: Product: HP LaserJet 2200
May 16 10:11:57 F17sda10 kernel: [66318.070016] usb 2-1: Manufacturer: HewLett Packard
May 16 10:11:57 F17sda10 kernel: [66318.070022] usb 2-1: SerialNumber: 00JPGGR04107
May 16 10:11:57 F17sda10 kernel: [66318.077309] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0217
May 16 10:11:57 F17sda10 logger: loading HP Device 002 004
May 16 10:11:57 F17sda10 udevd[600]: missing file parameter for attr
May 16 10:11:57 F17sda10 mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1"
May 16 10:11:57 F17sda10 mtp-probe: bus: 2, device: 4 was not an MTP device
May 16 10:11:57 F17sda10 logger: loading hp_printer_device 002 004
May 16 10:11:57 F17sda10 logger: loading HP Device 2-1 2-1
May 16 10:11:57 F17sda10 systemd[1]: Cannot add dependency job for unit mdmonitor-takeover.service, ignoring: Invalid argument
May 16 10:11:57 F17sda10 hp-mkuri: io/hpmud/model.c 625: unable to find [s{product}] support-type in /usr/share/hplip/data/models/models.dat
May 16 10:11:59 F17sda10 kernel: [66319.512145] usblp0: removed
May 16 10:11:59 F17sda10 kernel: [66319.533150] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0217
May 16 10:11:59 F17sda10 hp[2733]: io/hpmud/pp.c 627: unable to read device-id ret=-1
May 16 10:11:59 F17sda10 python: io/hpmud/pp.c 627: unable to read device-id ret=-1
May 16 10:11:59 F17sda10 udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/HP-LaserJet-2200
-------------
enter a print job:
$ lpr yadda
print job worked
from tail -f error_log
E [16/May/2013:10:11:59 -0700] Failed to update TXT record for Hewlett-Packard HP LaserJet 2200 @ F17sda10.pacbell.net: -2
from tail -f messages
May 16 10:26:55 F17sda10 systemd[1]: Cannot add dependency job for unit mdmo
nitor-takeover.service, ignoring: Unit mdmonitor-takeover.service failed to load: No such file or directory. See system logs and 'systemctl status mdmonitor-takeover.service' for details.
May 16 10:26:55 F17sda10 kernel: [67216.117299] usblp0: removed
May 16 10:26:58 F17sda10 kernel: [67219.170491] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0217
-------------
$ systemctl status mdmonitor-takeover.service
mdmonitor-takeover.service
Loaded: error (Reason: No such file or directory)
Active: inactive (dead)
----------
enter another print job with printer_not_ turned off then on: expect print to not work.
$ enscript yadda
[ 1 pages * 1 copy ] sent to printer
[byers@F17sda10 df13mail]$
printer hanging, light continues to blink for several minutes
nothing yet from tail -f error_log
tail -f messages:
May 16 10:45:31 F17sda10 systemd[1]: Cannot add dependency job for unit mdmonitor-takeover.service, ignoring: Unit mdmonitor-takeover.service failed to load: No such file or directory. See system logs and 'systemctl status mdmonitor-takeover.service' for details.
May 16 10:45:31 F17sda10 kernel: [68331.627940] usblp0: removed
May 16 10:45:31 F17sda10 kernel: [68331.912858] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0217
waiting to see blinking quit:
finally does,
this completes the cycle
if I now revive my access for a print job
by turning off the printer:
from tail -f error_log
E [16/May/2013:10:55:34 -0700] Failed to update TXT record for Hewlett-Packard HP LaserJet 2200 @ F17sda10.pacbell.net: -2
from tail -f messages:
May 16 10:55:34 F17sda10 kernel: [68934.750065] usb 2-1: USB disconnect, device number 4
May 16 10:55:34 F17sda10 kernel: [68934.750281] usblp0: removed
May 16 10:55:34 F17sda10 udev-configure-printer: Disabled printer ipp://localhost:631/printers/HP-LaserJet-2200 as the corresponding device was unplugged or turned off
May 16 10:55:34 F17sda10 systemd[1]: Service printer.target is not needed anymore. Stopping.
Jack
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
