Ed Greshko wrote: > In doing some googling on your device, it seems others have encountered > the same issue with some reporting success after altering the MTU. > > I suppose I would try changes there first. Posts suggest trying 1400. I had actually tried changing the MTU, with sudo ifconfig wlan0 mtu 1400 up It didn't solve the problem, but it did alter the packets I got according to wireshark. In fact I would have thought it was working from wireshark, but the image still doesn't appear. > If possible, I would check the network devices at the remote end to see > what they are set to. Normally, the default is 1500. Yes, both WiFi and ethernet have MTU set to 1500 on the remote server. > Additionally, and this is a long time ago, I had similar network issues > with a device and it was necessary to turn off tcp_window_scaling in the > kernel. Again, I had actually set net.ipv4.tcp_window_scaling=0 in /etc/sysctl.conf (and re-booted the laptop). I too had a problem a couple of years ago which I solved in this way. I'm going to install wireshark on my local CentOS-6.4 server, if I can, and see how the packets from the camera differ, as it works perfectly on the server. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College Dublin -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org