On Thu, 2013-05-02 at 10:36 +0800, Harish Pillay wrote: > Bill - > > > Dear Harish: > > > > They are internal SATA drives. > > I am assuming your system has something like what is shown in > this [0]. And that there is already a cable connecting the drive to > the board. Then there is nothing else to do except to check within > your BIOS to see if the drive is enabled as well. > > [0] http://s32.photobucket.com/user/KKilme/media/Resources/sata-on-mb-empty.jpg.html > [0] http://wiki.pcworld.com/index.php/Installing_SATA_hard_drives > > Harish I don't know if it affects F18, but when I put my wife on F17 with two SATA drives, it turned out that there was some kind of RAID built into the board. If I plugged the second drive into one port, it was seen as the second drive of the raid. Plugging into a different one, it was picked up as a real second drive. This is also one of those UEFI mother boards. Boy did I long for the good old days of cable selection and master/slave settings. Documentation seems gone, and Video's do not give you time to re-read and compare different views easily. This motherboard came with a video, but it only illustrated a simple setup with one hard drive and Windows. Sorry, I do not remember the mobo mfr or the model. I'll get it when she comes back this evening, just in case that helps. Regards, Les H -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org