Tim: >> I'd say, if you're installing BIND, then run a DHCP server on that >> same computer, and disable any other DHCP servers on your LAN (such >> as in your modem/router). Configure your DHCP server to tell all >> clients on your network the addresses for configuring your network >> (gateway, DNS servers, etc.). Then leave NetworkManager running >> normally, without any manual configuration on each client. >> >> That gets you a normal running network, where each client is >> centrally configured from one server. There's no messing around with >> any client configuration on any client. >> >> You can have dynamic or static IPs, for your clients, this way. It >> depends on how you configure your DHCP server. lee: > Why waste resources by running all this? If bothering to install a name server, why stop at a half-arsed job? On anything more than a two or three machine LAN, it rapidly becomes a nuisance to maintain hosts files. Been there, done that, not going to do it again. Once done, it's easy enough to have the name server resolve local machine names (which certainly aids some LAN networking, such as internal mail, or other internal LAN or external services, new system installs, and all manner of things become easier when you don't have to laboriously hand-configure the client). And it's easy enough to configure your DHCP server to set client addresses as desired. It's even relatively easy enough to tie the DHCP and DNS servers together, so one updates the other, when devices are added. I did this years ago, and never had to fudge around with hosts files again. Never had to memorise which IPs referred to which machines, as I could use hostnames on any machine. Never had to memorise all the parameters that I'd have to set up into a client's configuration to make it join the network. Just plug in the cable and it goes. > It's not like the IPs would change Ya think? You never get guest computers, or get asked to take in someone else's computer and fix it, or install Linux on it for them? You never add new devices? Some of which really expect DHCP (network printers, gaming consoles, media devices). Or had to change some hardware, only to find that the bastard device wants to be on a 192.168.1.x network rather than a 192.168.0.x network that you're using, and you have to manually change everything around, individually, to work past this. DHCP is a falsedeity-send, not a curse. -- [tim@localhost ~]$ uname -r 2.6.27.25-78.2.56.fc9.i686 Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
