|
Well just a month ago, I used ntfs-3g and fuse to work with an external HDD on Fedora Core 6, a few days ago system cannot save files on my external HDD, I unmount HDD, and restart and it was the solution, but now I can't create directories, the message is:
mkdir: no se puede crear el directorio /media/mount_point_i_believe/directory/directory_to_create error de entrada/salida I typed the command : dmesg at terminal and this is the result: sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1536 bytes Time: 12:41:05 Date: 04/22/112 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [C002] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH6 GPIO PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C100._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C110._PRT] ACPI: PCI Interrupt Link [C10C] (IRQs *10 11) ACPI: PCI Interrupt Link [C10D] (IRQs *10 11) ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11) ACPI: PCI Interrupt Link [C10F] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C11C] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C11D] (IRQs *10 11) ACPI: PCI Interrupt Link [C11E] (IRQs 10 11) *0, disabled. ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126] ACPI: Power Resource [C1FE] (on) ACPI: Power Resource [C206] (on) ACPI: Power Resource [C2EE] (off) ACPI: Power Resource [C2EF] (off) ACPI: Power Resource [C2F0] (off) ACPI: Power Resource [C2F1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0x5f7fffff could not be reserved pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0a: ioport range 0x1000-0x107f has been reserved pnp: 00:0a: ioport range 0x1100-0x113f has been reserved pnp: 00:0a: ioport range 0x1200-0x121f has been reserved pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: f0000000-f00fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 60000000-63ffffff MEM window: 64000000-67ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: f0100000-f03fffff PREFETCH window: 60000000-63ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1506k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1337690465.381:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key CAA333178AF1EC5F - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Transitioning device [C2F2] to D3 ACPI: Transitioning device [C2F2] to D3 ACPI: Fan [C2F2] (off) ACPI: Transitioning device [C2F3] to D3 ACPI: Transitioning device [C2F3] to D3 ACPI: Fan [C2F3] (off) ACPI: Transitioning device [C2F4] to D3 ACPI: Transitioning device [C2F4] to D3 ACPI: Fan [C2F4] (off) ACPI: Transitioning device [C2F5] to D3 ACPI: Transitioning device [C2F5] to D3 ACPI: Fan [C2F5] (off) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] Marking TSC unstable due to: possible TSC halt in C2. Time: hpet clocksource has been installed. ACPI: Thermal Zone [TZ0] (31 C) ACPI: Thermal Zone [TZ1] (31 C) ACPI: Thermal Zone [TZ2] (21 C) ACPI: Thermal Zone [TZ3] (20 C) ACPI: Thermal Zone [TZ4] (75 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3040-0x3047, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... Clocksource tsc unstable (delta = -165098218 ns) hda: HL-DT-ST DVDRAM GSA-T40N, ATAPI CD/DVD-ROM drive hda: selected mode 0x22 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide-floppy driver 0.99.newide Yenta: CardBus bridge found at 0000:02:06.0 [103c:30d5] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:06.0, mfunc 0x01be1b32, devctl 0x44 Yenta: ISA IRQ mask 0x04f8, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf03fffff pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff PNP: PS/2 Controller [PNP0303:C1FB,PNP0f13:C1FC] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 12:52:684 hash matches device full Freeing unused kernel memory: 268k freed Write protecting the kernel read-only data: 925k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00003020 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0584000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.21 loaded. ahci 0000:00:1f.2: version 2.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 20 usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xf881e100 ctl 0x00000000 bmdma 0x00000000 irq 20 ata2: SATA max UDMA/133 cmd 0xf881e180 ctl 0x00000000 bmdma 0x00000000 irq 20 ata3: SATA max UDMA/133 cmd 0xf881e200 ctl 0x00000000 bmdma 0x00000000 irq 20 ata4: SATA max UDMA/133 cmd 0xf881e280 ctl 0x00000000 bmdma 0x00000000 irq 20 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: WDC WD1200BEVS-60UST0, 01.01A01, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1337690471.509:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats security: 61 classes, 58427 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda9, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1337690471.802:3): policy loaded auid=4294967295 hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. intel_rng: FWH not detected cs: IO port probe 0xa00-0xaff: clean. e100: eth0: e100_probe: addr 0xf0101000, irq 19, MAC addr 00:1E:EC:1C:C7:26 Floppy drive(s): fd0 is 1.44M sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp: driver loaded but no devices found sonypi: Sony Programmable I/O Controller Driver v1.26. SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 mtrr: no more MTRRs available mtrr: no more MTRRs available ACPI: AC Adapter [C1AB] (off-line) ACPI: Battery Slot [C1AC] (battery present) No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [C20B] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [C20C] ACPI: Video Device [C085] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda9, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda7, type ext3), uses xattr Adding 10482372k swap on /dev/sda8. Priority:-1 extents:1 across:10482372k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 i2c /dev entries driver SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers present mtrr: no more MTRRs available mtrr: no more MTRRs available usb 1-1.1: new full speed USB device using uhci_hcd and address 3 usb 1-1.1: not running at top speed; connect to a high speed hub usb 1-1.1: configuration #1 chosen from 1 choice hub 1-1.1:1.0: USB hub found hub 1-1.1:1.0: 4 ports detected usb 1-1.1.3: new full speed USB device using uhci_hcd and address 4 usb 1-1.1.3: not running at top speed; connect to a high speed hub usb 1-1.1.3: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 1-1.1.4: new full speed USB device using uhci_hcd and address 5 usb 1-1.1.4: not running at top speed; connect to a high speed hub usb 1-1.1.4: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 4:0:0:0: [sdb] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg1 type 0 scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 4:0:0:1: [sdc] Attached SCSI removable disk sd 4:0:0:1: Attached scsi generic sg2 type 0 scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 4:0:0:2: [sdd] Attached SCSI removable disk sd 4:0:0:2: Attached scsi generic sg3 type 0 scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 4:0:0:3: [sde] Attached SCSI removable disk sd 4:0:0:3: Attached scsi generic sg4 type 0 usb-storage: device scan complete scsi 5:0:0:0: Direct-Access ST310005 28AS PQ: 0 ANSI: 2 CCS sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 38 00 00 sd 5:0:0:0: [sdf] Assuming drive cache: write through sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 38 00 00 sd 5:0:0:0: [sdf] Assuming drive cache: write through sdf: sdf1 sd 5:0:0:0: [sdf] Attached SCSI disk sd 5:0:0:0: Attached scsi generic sg5 type 0 usb-storage: device scan complete fuse init (API version 7.8) SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts usb 1-1.1.4: USB disconnect, address 5 hub 1-1.1:1.0: hub_port_status failed (err = -71) hub 1-1.1:1.0: connect-debounce failed, port 4 disabled hub 1-1.1:1.0: cannot disable port 4 (err = -71) usb 1-1.1: USB disconnect, address 3 usb 1-1.1.3: USB disconnect, address 4 usb 1-1.1: new full speed USB device using uhci_hcd and address 6 usb 1-1.1: not running at top speed; connect to a high speed hub usb 1-1.1: configuration #1 chosen from 1 choice hub 1-1.1:1.0: USB hub found hub 1-1.1:1.0: 4 ports detected usb 1-1.1.3: new full speed USB device using uhci_hcd and address 7 usb 1-1.1.3: not running at top speed; connect to a high speed hub usb 1-1.1.3: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 7 usb-storage: waiting for device to settle before scanning scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg1 type 0 scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 6:0:0:1: [sdc] Attached SCSI removable disk sd 6:0:0:1: Attached scsi generic sg2 type 0 scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 6:0:0:2: [sdd] Attached SCSI removable disk sd 6:0:0:2: Attached scsi generic sg3 type 0 scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 sd 6:0:0:3: [sde] Attached SCSI removable disk sd 6:0:0:3: Attached scsi generic sg4 type 0 usb-storage: device scan complete usb 1-1.1.4: new full speed USB device using uhci_hcd and address 8 usb 1-1.1.4: not running at top speed; connect to a high speed hub usb 1-1.1.4: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 8 usb-storage: waiting for device to settle before scanning scsi 7:0:0:0: Direct-Access ST310005 28AS PQ: 0 ANSI: 2 CCS sd 7:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB) sd 7:0:0:0: [sdg] Write Protect is off sd 7:0:0:0: [sdg] Mode Sense: 00 38 00 00 sd 7:0:0:0: [sdg] Assuming drive cache: write through sd 7:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB) sd 7:0:0:0: [sdg] Write Protect is off sd 7:0:0:0: [sdg] Mode Sense: 00 38 00 00 sd 7:0:0:0: [sdg] Assuming drive cache: write through sdg: sdg1 sd 7:0:0:0: [sdg] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg5 type 0 usb-storage: device scan complete scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 122095175 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 122095175 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786431 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786431 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786433 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786433 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786433 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786433 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786433 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786433 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 122095175 scsi 5:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdf1, logical block 786431 This is just I could copy from Terminal, I don't know if it could be full info, for your attention, thanks so much :) |
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
