Patrick Lists wrote: > I have an up-to-date F16 x86_64 box with 2 eSATA ports on the back > powered by a JMicron JMB362 chip. When I attach an external SATA > drive to the eSATA port and power up the drive it is recognized > fine. But when I power down that drive, wait 2 minutes, and power it > up again the drive is no longer recognized. Also there are no > messages related to the 2nd power up in /var/log/messages. All SATA > controllers are set to AHCI in the BIOS. No idea where to go from > here. Anyone have any suggestions how I can fix this? Does it work with older (pre 3.3) kernels? It might have something to do with http://lkml.org/lkml/2012/3/4/152 Hope this helps, James. -- E-mail: james@ | You can accept the existence of rain without denying the aprilcottage.co.uk | existence of umbrellas. | -- http://ozyandmillie.org/2006/om20060615.html -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
