On 02/13/2012 11:34 AM, nullv@xxxxxxx wrote:
Hi,
I'm hoping that you can point out what i'm missing here. I have a server
(router0) with a public ip 41.123.234.74/29 that's using an internet
modem 41.123.234.73/29 as a gateway. the server (router0) also has a
second card used for lan comms where it has ip address 10.0.0.1/8.
addresses are broadcast via dhcp along with DNS and gateway settings and
everything works perfectly when i MASQUERADE the local ips to the wan
address with iptables.
The issue is this: i'm trying to set up another server (db0) behind
router0 on the lan side and want to have it's packets go the my router0
gateway and be forwarded to the internet side and vice versa. db0 has an
address 41.123.234.75/29 with .74 set as the gateway. if i set up my
addressing on db0 using lan addresses and 10.0.0.1 my db0 server can
connect and everything but if i use the wan address i can't connect even
to the 41.123.234.74/29 router0 address. i had inserted the following
rule to my tables forward chain:
iptables -I FORWARD -s 41.123.234.72/29 -j ACCEPT
to allow public packets from either side to be forwarded to both sides
but i can't seem to get the boxes to through to each other.
Can anyone tell me were i'm getting it wrong?
Thanks in advance
Hi nullv,
I use this layout successfully. If you want more than one subnet a
simple switch plugged into eth1 allows adding more than one box/subnet.
# your /29
# 41.123.234.72/32 NETWORK
# 41.123.234.73/32 GATEWAY
# 41.123.234.74/32 WAN1
# 41.123.234.75/32 WAN2
# 41.123.234.76/32 WAN3
# 41.123.234.77/32 WAN4
# 41.123.234.78/32 WAN5
# 41.123.234.79/32 BROADCAST
### iptables rules
# define custom chains and zero connection counts
:WAN1 - [0:0]
:WAN2 - [0:0]
:WAN3 - [0:0]
:WAN4 - [0:0]
:WAN5 - [0:0]
# inbound connections
-A PREROUTING -d 41.123.234.74/32 -j WAN1
-A PREROUTING -d 41.123.234.75/32 -j WAN2
-A PREROUTING -d 41.123.234.76/32 -j WAN3
-A PREROUTING -d 41.123.234.77/32 -j WAN4
-A PREROUTING -d 41.123.234.78/32 -j WAN5
# pick one of your WAN IPs for outbound connections
-A POSTROUTING -o eth0 -j SNAT --to-source 41.123.234.74
# this will map inbound WAN IP:PORT to various internal servers
# NAT can point to different networks
-A WAN1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.1
-A WAN1 -p tcp -m tcp --dport 443 -j DNAT --to-destination 10.5.0.2
-A WAN2 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.16.7.3
-A WAN2 -p tcp -m tcp --dport 8008 -j DNAT --to-destination 10.5.2.4
-A WAN2 -p tcp -m tcp --dport 8080 -j DNAT --to-destination 172.1.2.5
-A WAN3 -p tcp -m tcp --dport 80 -j DNAT --to-destination 172.44.2.6
-A WAN4 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.9.3.7
-A WAN5 -p tcp -m tcp --dport 3306 -j DNAT --to-destination 10.192.4.8
# add rules to allow access to services on the router
-A INPUT ...
# add rules to allow/deny access between subnets
-A FORWARD ...
Hope this applies to your situation,
Mike Wright
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
