On 01/24/2012 12:43 PM, Alexander Volovics wrote:
On
01/24/2012 06:33 PM, Jim wrote:
On 01/24/2012 12:05 PM, Alexander Volovics
wrote:
I have a Broadcom wlan 4312 [14e4:4315]
in my laptop.
After the latest kernel update to kernel-3.2.1-13 I decided to
install
the necessary firmware heeding the following dmesg output:
[ 82.515047] b43-phy0 ERROR: Firmware file "b43/ucode15.fw"
not found
[ 82.515054] b43-phy0 ERROR: Firmware file
"b43-open/ucode15.fw" not
found
[ 82.515060] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware
and
download the correct firmware for this driver version. Please
carefully read all instructions on this website.
The website suggests downloading broadcom-wl-5.100.138.tar.bz2
if
using the b43 driver from the 3.2 kernel.
I did that but then this happens:
b43-fwcutter -w /lib/firmware wl_apsta.o
Sorry, the input file is either wrong or not supported by
b43-fwcutter.
This file has an unknown MD5sum
e1b05e268bcdbfef3560c28fc161f30
b43-fwcutter in Fed 16 is version 0.14 and indeed the FW15
file
supported by b43-fwcutter version 0.14 has a different md5sum.
The wireless.kernel.org site also advices using b43-fwcutter
version
0.15 but this version does not seem to be available for fed
16.
Can this be the problem?
You want ito nstall kmod-wl and it will
install all dependencies .
Then you want to go into /etc/modprobe.d/blacklist.conf and
enter
"blacklist b43-fwcutter" w/o quotes
Why would I do that?
I already have a driver "b43" from the new kernel-3.2 loaded and
this seems to be the advised driver, not the wl driver.
I am just missing the firmware!
AV
Just try what i said and I think You will Like it .
Someone FINALLY got around to take the b43-cutter out of Fedora.
|
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
