On 11.11.2011 14:47, Bryn M. Reeves wrote: > If it's a serveraid card then some of the RAID status information is > available via ipmi. The ipmi-sensors command (part of freeipmi) > should > be able to display drive status and overall RAID error status. > > If you don't mind using the vendor's proprietary tools then either > IBM's > ServeRAID manager or Adaptec's own raid management tool should work > with > these cards. We have the same IBM server. IPMI does not display the raid status. Only this: # ipmitool sensor Drive 1 Status | 0x0 | discrete | 0x0180| na | na | na | na | na | na Drive 2 Status | 0x0 | discrete | 0x0180| na | na | na | na | na | na Drive 3 Status | 0x0 | discrete | 0x0180| na | na | na | na | na | na Drive 4 Status | 0x0 | discrete | 0x0180| na | na | na | na | na | na RAID Error | 0x0 | discrete | 0x0080| na | na | na | na | na | na Therefore, I recommend the proprietary IBM/Adaptec tools. Best regards, Morten -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
