Re: getting packet dropperd on interface

[Soham Chakraborty <sohamwonderpiku4u@xxxxxxxxx>]

What does ethtool -g em1 say? A very common reason of dropping packets is that the rx and tx buffers have been full. In this case, you can increase the count with ethtool -G switch and check again.

-- Soham

On Sat, Oct 15, 2011 at 4:47 PM, Benjamin <benjo11111@xxxxxxxxx> wrote:

 Hi,

lspci -v



05:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
    Subsystem: Super Micro Computer Inc Device 040d
    Flags: bus master, fast devsel, latency 0, IRQ 18
    Memory at fb5e0000 (32-bit, non-prefetchable) [size=128K]
    I/O ports at dc00 [size=32]
    Memory at fb5dc000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [c8] Power Management version 2
    Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [e0] Express Endpoint, MSI 00
    Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Device Serial Number 00-25-90-ff-ff-39-70-0e
    Kernel driver in use: e1000e
    Kernel modules: e1000e


Thanks,
Benjamin



On 10/15/2011 04:41 PM, Reindl Harald wrote:
> Am 15.10.2011 13:09, schrieb Benjamin:

>> OS : FEDORA 15 64 BIT
>> LAN INTERFACE IS ONBOARD GIGABIT LAN CARD

> this is no information
>
> WHAT network-card is on the board?
> lspci is your friend!

>
>
>
>

--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines

-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines