Daniel J Walsh ha scritto / said the following il giorno/on 22/09/2011 22:13: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 09/22/2011 04:08 PM, antonio montagnani wrote: >> Daniel J Walsh ha scritto / said the following il giorno/on >> 22/09/2011 21:56: On 09/22/2011 03:42 PM, antonio montagnani >> wrote: >>>>> after two hours of operation my Fedora 15 shuts down and >>>>> system reboots byitself suddenly: I was thinking that it was >>>>> at the end of his life, but I noticed after rebooting that I >>>>> was already logged as user and I got a message about Selinux >>>>> stating that some cups/backend/hp could not write somewhere >>>>> (I deleted the message by mistake).Any comment? >> Sounds like a kernel issue or hardware, overheating. I doubt this >> is an SELinux issue. I would look in the /var/log/messages for >> indication of why the system is going down. >> >> This is tthe kernel message about Selinux: >>> SELinux is preventing /usr/lib/cups/backend/hp from read access >>> on the chr_file 044. For complete SELinux messages. run sealert >>> -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 >> >> and this is the messages file and the crash happened between these >> lines >>> Sep 22 20:42:10 localhost python: io/hpmud/pp.c 627: unable to >>> read device-id ret=-1 Sep 22 20:42:10 localhost >>> udev-configure-printer: no corresponding CUPS device found Sep 22 >>> 20:42:12 localhost setroubleshoot: SELinux is preventing >>> /usr/lib/cups/backend/hp from read access on the chr_file 044. >>> For complete SELinux messages. run sealert -l >>> b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep 22 20:42:14 localhost >>> setroubleshoot: SELinux is preventing /usr/lib/cups/backend/hp >>> from read access on the chr_file 044. For complete SELinux >>> messages. run sealert -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep >>> 22 20:49:30 localhost kernel: [ 5538.231226] [drm] nouveau >>> 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) Sep >>> 22 21:04:25 localhost kernel: [ 6433.067959] [drm] nouveau >>> 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) Sep >>> 22 21:09:15 localhost dbus: [system] Activating service >>> name='org.freedesktop.PackageKit' (using servicehelper) Sep 22 >>> 21:09:15 localhost dbus: [system] Successfully activated service >>> 'org.freedesktop.PackageKit' Sep 22 21:12:06 localhost kernel: [ >>> 6894.301934] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on >>> vga encoder (output 0) Sep 22 21:18:39 localhost kernel: imklog >>> 5.8.2, log source = /proc/kmsg started. Sep 22 21:18:39 localhost >>> rsyslogd: [origin software="rsyslogd" swVersion="5.8.2" >>> x-pid="739" x-info="http://www.rsyslog.com";] start Sep 22 >>> 21:18:39 localhost kernel: [ 0.000000] Initializing cgroup >>> subsys cpuset Sep 22 21:18:39 localhost kernel: [ 0.000000] >>> Initializing cgroup subsys cpu Sep 22 21:18:39 localhost kernel: >>> [ 0.000000] Linux version 2.6.40.4-5.fc15.i686.PAE >>> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 >>> 20110603 (Red Hat 4.6.0-10) (GCC) ) #1 SMP Tue Aug 30 14:43:52 >>> UTC 2011 Sep 22 21:18:39 localhost kernel: [ 0.000000] >>> BIOS-provided physical RAM map: Sep 22 21:18:39 localhost kernel: >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 >>> (usable) Sep 22 21:18:39 localhost kernel: [ 0.000000] >>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Sep 22 >>> 21:18:39 localhost kernel: [ 0.000000] BIOS-e820: >>> 00000000000e0000 - 0000000000100000 (reserved) >> >> butfrom sensors I get >>> sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: >>> +1.37 V (min = +1.45 V, max = +1.75 V) +3.3 Voltage: >>> +1.60 V (min = +3.00 V, max = +3.60 V) +5.0 Voltage: >>> +1.62 V (min = +4.50 V, max = +5.50 V) +12.0 Voltage: >>> +11.98 V (min = +11.20 V, max = +13.20 V) CPU FAN Speed: >>> 3068 RPM (min = 0 RPM) CHASSIS FAN Speed: 2410 RPM (min = >>> 0 RPM) CPU Temperature: +50.0°C (high = +90.0°C, crit = >>> +125.0°C) MB Temperature: +46.0°C (high = +70.0°C, crit = >>> +125.0°C) Power Temperature: +123.0°C (high = +80.0°C, crit = >>> +125.0°C) >>> >>> w83627ehf-isa-0290 Adapter: ISA adapter Vcore: +1.37 V >>> (min = +0.00 V, max = +1.85 V) in1: +1.82 V (min = >>> +0.00 V, max = +0.03 V) ALARM AVCC: +3.22 V (min = >>> +0.00 V, max = +0.00 V) ALARM +3.3V: +3.20 V (min = >>> +0.00 V, max = +0.06 V) ALARM in4: +2.04 V (min = >>> +0.00 V, max = +0.00 V) ALARM in5: +1.62 V (min = >>> +0.00 V, max = +0.00 V) ALARM in6: +1.97 V (min = >>> +0.00 V, max = +0.00 V) ALARM 3VSB: +3.18 V (min = >>> +0.00 V, max = +0.00 V) ALARM Vbat: +0.00 V (min = >>> +0.00 V, max = +0.00 V) in9: +1.35 V (min = +0.00 V, >>> max = +0.00 V) ALARM fan1: 2410 RPM (min = 168750 RPM, >>> div = 4) ALARM fan2: 3068 RPM (min = 0 RPM, div = 2) >>> ALARM fan3: 0 RPM (min = 164 RPM, div = 128) ALARM >>> fan5: 0 RPM (min = 0 RPM, div = 4) temp1: >>> +46.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = >>> thermistor temp2: +50.0°C (high = +80.0°C, hyst = >>> +75.0°C) sensor = diode temp3: +123.5°C (high = +80.0°C, >>> hyst = +75.0°C) ALARM sensor = thermistor >> >> >> > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.11 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iEYEARECAAYFAk57ltEACgkQrlYvE4MpobOengCfXd1zQsSS3nFkt+WS1X6FTmeu > YHcAnjTbMiwJ0MJJ5L+PPBsVzL82LEXv > =UgVD > -----END PGP SIGNATURE----- I miss your comment: but whyreboot starts with imklog?? Forgot to say that I am experiencing reboots ona rgularbasis, i.e. every two hours more or less -- Antonio -------------------------------------------- Prima di stampare pensa all'ambiente Think about environment before printing Skype: amontag52 Linux Fedora 15 Lovelock on Casa Linux user number 362582 http://www.campingmonterosa.com http://www.studiodacolpaloschi.it ------------------------------------------- -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
