Hi
I have been trying to connect via wpa_supplicant
this is wpa_supplicant
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
eapol_version=1
ap_scan=0
fast_reauth=1
network={
ssid="npower2"
scan_ssid=1
#bssid=00:19:5b:4c:1e:59
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk=008c0ea5d7244b9f2c944e4a4472bf4e040296f4b8c28c6e5b3d8c9da84b3fee
priority=5
}
command
wpa_supplicant -iwlan1 -c /etc/wpa_supplicant/wpa_supplicant.conf -B -dd
resulting in output
Initializing interface 'wlan1' conf
'/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default'
ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ->
'/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wheel'
eapol_version=1
ap_scan=0
fast_reauth=1
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=7):
6e 70 6f 77 65 72 32 npower2
scan_ssid=1 (0x1)
proto: 0x3
key_mgmt: 0x2
pairwise: 0x18
group: 0x18
PSK - hexdump(len=32): [REMOVED]
priority=5 (0x5)
Priority group 5
id=0 ssid='npower2'
Initializing interface (2) 'wlan1'
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:60:b3:a5:ce:78
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
ctrl_interface_group=10 (from group name 'wheel')
Added interface wlan1
Daemonize..
resulting in no AP being associated
I must be missing something simple
anyone any ideas?
BTW I can can connect via Network manager but that has its own issues
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
