On Wed, 2011-05-11 at 18:36 +0100, Aaron Gray wrote: > I have an existing network on 192.168.0.1 served by a Netgear Router, > then a Linux box with two ethernet cards. I am trying to get the > gateway working for the 192.168.1 subnet to be able to see the > internet. Really not enough information... We'd want to see the whole configuration file for the gateway. Probably the firewall rules, too. Is it like I outlined? The gateway with the two interfaces, with each interface on the two different subnets, with appropriate addresses on each? The clients on each subnet having gateway addresses like my example? et cetera, et cetera... > I tried the gateway address as 192.168.0.254 but that did not work > either. The .254 ending address is nothing special. It's a common address to use, but it doesn't configure the device to work in a special way. When you change device configurations around, are you restarting the networks so they actually do read the configuration? Have you got the right patch leads between devices? (Straight-through or cross-overs, where required.) First tests would be clients pinging their gateway, gateway pinging their clients. Before you try clients pinging through the gateway to clients the other side. How's the gateway going to work? As a router? NATing? Are you IPv4-only? You mentioned webmin, something I've only played with many years ago, and gave up because it added its own complications to things. You're probably better off directly working with the configuration files while you learn how to do this. Later on using something like that as a convenience device. -- [tim@localhost ~]$ uname -r 2.6.27.25-78.2.56.fc9.i686 Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
