On 05/10/2011 10:13 AM, Aaron Gray wrote: > I cannot seem to bring eth1 up. > > # ifup eth1 > Error: Connection activation failed: Device not managed by > NetworkManager or unavailable > > # cat ifcfg-eth1 > GATEWAY0=192.168.0.1 > IPV6INIT=yes > BROADCAST="192.168.1.255" > DNS1=8.8.8.8 > UUID=9c92fad9-6ecb-3e6c-eb4d-8a47c6f50c04 > BOOTPROTO=none > NAME="System eth1" > PREFIX0=24 > MACADDR="00:26:18:E4:99:77" > NM_CONTROLLED=yes > IPV6_FAILURE_FATAL=no > TYPE=Ethernet > DEVICE=eth1 > IPADDR0=192.168.1.1 > IPV6_AUTOCONF=yes > MTU="" > NETMASK="255.255.255.0" > IPV6_DEFROUTE=yes > DEFROUTE=yes > IPADDR="192.168.1.1" > NETWORK="" > IPV4_FAILURE_FATAL=yes > ONBOOT=no > HWADDR=00:26:18:E4:99:77 > IPV6_PEERDNS=yes > IPV6_PEERROUTES=yes I dunno about the "IPADDR0", "PREFIX0" stuff (in fact, anything with a "blah0". An interface has but one IP, one netmask, etc. If you want multiple IPs on a NIC you set up an alias such as eth1:1. Try a minimum config and see if that works: DEVICE=eth1 BOOTPROTO=static BROADCAST=192.168.1.255 HWADDR=00:26:18:E4:99:77 IPADDR=192.168.1.1 IPV6INIT=yes IPV6_AUTOCONF=yes NETMASK=255.255.255.0 NETWORK=192.168.1.0 DNS1=8.8.8.8 NM_CONTROLLED=yes ONBOOT=no (in truth, you don't need the "NETWORK=" or "BROADCAST=" bits either...they're inferred by the desired IP and netmask). ---------------------------------------------------------------------- - Rick Stevens, Systems Engineer, C2 Hosting ricks@xxxxxxxx - - AIM/Skype: therps2 ICQ: 22643734 Yahoo: origrps2 - - - - Diplomacy: The art of saying "Nice doggy!" until you can find a - - big enough rock. - ---------------------------------------------------------------------- -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
