Tom H <tomh0665 <at> gmail.com> writes: > ... > To OP: (You can check that Fedora is recognizing the FreeBSD disk with > "dmesg | grep bsd" but it should be detected by default) > > I've never mounted a FreeBSD slice that was on a partition of a Linux > disk so I'm not sure how that'll work. > > With a separate disk with one ufs partition and a few slices, display > the ufs slices on Fedora with > fdisk /dev/sda > b > p > > The ufs partition will be sda1 and slice a will be sda5, slice b will > be sda6, etc. > > You then have to pass the options below when mounting (for slice a) > mount -t ufs -o ro,ufstype=ufs2 /dev/sda5 /path/to/mount/point Thanks Tom. Here is how it worked for me. # fdisk -l /dev/sda Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa24da24d Device Boot Start End Blocks Id System /dev/sda1 63 81920159 40960048+ 7 HPFS/NTFS /dev/sda2 * 81920160 111222719 14651280 a5 FreeBSD /dev/sda3 111222720 140525279 14651280 83 Linux /dev/sda4 140525280 246017519 52746120 5 Extended /dev/sda5 140525343 146391839 2933248+ 82 Linux swap / Solaris /dev/sda6 146391903 158109839 5858968+ 83 Linux /dev/sda7 158109903 187412399 14651248+ 83 Linux /dev/sda8 187412463 216714959 14651248+ 83 Linux /dev/sda9 216715023 246017519 14651248+ 83 Linux # dmesg | grep bsd [ 1.550749] sda2: <bsd: sda10 sda11 sda12 sda13 sda14 > # fdisk /dev/sda Command (m for help): m Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): b Reading disklabel of /dev/sda2 at sector 81920161. BSD disklabel command (m for help): p 8 partitions: # start end size fstype [fsize bsize cpg] a: 81920160 82942111 1021952 4.2BSD 0 0 0 b: 82942112 90837066 7894955 swap c: 81920160 111222719 29302560 unused 0 0 d: 90837067 92842058 2004992 4.2BSD 0 0 0 e: 92842059 93849674 1007616 4.2BSD 0 0 0 f: 93849675 111222719 17373045 4.2BSD 0 0 0 BSD disklabel command (m for help): q # # mount -t ufs -o ro,ufstype=ufs2 /dev/sda10 /media # df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda7 14420896 7414168 5541604 58% / tmpfs 1025992 448 1025544 1% /dev/shm /dev/sda10 494766 221560 233638 49% /media # mount ... /dev/sda10 on /media type ufs (ro,ufstype=ufs2) # cat /proc/mounts ... /dev/sda10 /media ufs ro,relatime,ufstype=ufs2,onerror=lock 0 0 # ls -al /media total 64 drwxr-xr-x 20 root root 512 Mar 2 23:36 . dr-xr-xr-x. 23 root root 4096 Mar 14 14:01 .. drwxr-xr-x 2 root root 1024 Mar 2 23:04 bin drwxr-xr-x 8 root root 1024 Mar 2 22:57 boot drwxr-xr-x 2 root root 512 Nov 28 01:32 cdrom lrwxr-xr-x 1 root root 10 Nov 28 01:37 compat -> usr/compat -r--r--r-- 1 root root 6200 Mar 2 23:04 COPYRIGHT -rw-r--r-- 2 root root 798 Mar 2 23:04 .cshrc ... And that stuff above is my FreeBSD dir. OK. But, the stuff I documented in a later thread under "Re: FreeBSD Drive Support ??" should not be allowed. JB -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
