On 02/14/2011 05:02 AM, Joseph L. Casale wrote: >> lspci command showed nothing. > Because its not a PC device. > >> lsusb shows >> >> Bus 001 Device 005: ID 07d1:3304 D-Link System > man lsusb, you will see -d looks for vendor:[prod id] which would > lead you to know that 07d1 is D-Link's ID and 3304 is the product. > Unfortunately http://www.linux-usb.org/usb.ids ends at 3303 for D-Link. > > A quick Google shows http://www.linuxforums.org/forum/red-hat-fedora-linux/163594-usb-wireless-drivers-problems.html > which appears to have worked at the bottom of the thread... Thank you very much for the link. It works after the suggested mod. Problem I found is that this driver does not seem to mesh with the linux wpa_supplicant client, so it ends up associating with the AP with OPEN (i.e un-encrypted) mode. Which is very strange because my AP is configured with WPA2-PSK and AES encryption. So, I have no idea how this wireless dongle can associate with the AP. However, if I leave it be for about 30 minutes or more, it finally changes the association from OPEN to WPA2_PSK with encryption. I also learned that the driver from realtek (which is what I downloaded, and modded according to the link you provided), produces the module r8712u.ko , which contains support for several chipsets, including the RTL8192[SU]_USB. Thanks again for the link. I will keep it around in case I run into people who are trying to make it work. Cheers, JD -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
