On 10/13/2010 02:30 AM, Paul Cartwright wrote: > On Tue October 12 2010, JD wrote: >> I read on a blog that setting speed=0 in /etc/wodim.conf >> will make wodim burn at lowest possible speed. >> 10X is hard;y lowest possible speed. > try man wodim.. it says: > If you use speed=0 with a MMC compliant > drive, wodim will switch to the lowest possible speed for drive > and medium. If you are using an old (non MMC) drive that has > problems with speed=2 or speed=4, you should try speed=0. > > so the drive has to be MMC compliant for that to work.. > > > Yeah... well, I do not have an old drive. It is only 3 years old. (DVD+-R) 16X, RW-8X, CDR-24X. Output says it is MMC. $ wodim -checkdrive dev=/dev/sr0 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'Slimtype' Identification : 'DVD A DS8A1P ' Revision : 'CX17' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
