On 10/03/2010 09:09 AM, Jim wrote: > On 10/02/2010 08:28 PM, JD wrote: >> On 10/02/2010 02:42 PM, Jim wrote: >>> What is the 6749 in this command ? >>> >>> >>> # netstat -nltp | grep 22 >>> tcp 0 0 0.0.0.0:22 >>> 0.0.0.0:* LISTEN 6749/sshd >>> tcp 0 0 0.0.0.0:8822 >>> 0.0.0.0:* LISTEN 1666/smfpd >>> tcp 0 0 :::22 >>> :::* LISTEN 6749/sshd >> That's the process id. >> > I guess this would indicate I'am getting out onto the Internet. > But is SSH ? > > # host -a 61.58.52.206 > Trying "206.52.58.6.61.in-addr.arpa" > ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 28179 > ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 > > ;; QUESTION SECTION: > ;206.52.58.68.in-addr.arpa. IN PTR > > ;; ANSWER SECTION: > 206.52.58.68.in-addr.arpa. 7200 IN PTR > c-61-58-52-206.hsd1.in.comcast.net. > > Received 91 bytes from 61.87.72.134#53 in 29 ms > Well, the process ID of the sshd does not mean you ARE going over the internet, targeting a remote port 22. The sshd is in listening mode, that's all. Also, on your end, it matters not whether or not you are running the sshd, since you are not trying to ssh into your own machine. You want to ssh out to a remote machine, and that's the machine that is running the sshd that should respond to your connection request. When you shared with us the firewall entries, was that for your machine or the remote machine you are trying to connect to? if that was for YOUR machine, then please run the command iptables -L -n on the remote machine and post the results. Also, is your machine connected to a router/gateway? If so, can you login to that router or gateway (usually by aiming your browser to the router's LAN ip address. Go thtough all it's menus that display/configure ports and firewalls. See if that is where the block is. -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
