On 09/19/2010 11:03 AM, Michael D. Setzer II wrote: > In switching from a Trendnet KV-400 swith to a USB 2.0 KVM Switch I am > having a problem with the monitor coming up in 1024x768 mode instead of > the 1280x1024. If I plug the monitor directly to this Fedora 12 machine, it > comes up as 1280x1024? > > The monitor is a Sceptre Tech Inc 19" which is recognized by the fedora > when it is connected directly to the machine with 1280x1024 with 60hz. > > If I then hook the monitor back up thru the switch if works at the correct > resolution, but expect that a restart will put it back to the 1024x768, and from > the specs it should be running at 75hz. > > Haven't found a fedora drive for this monitor, and system-config-display > doesn't show it. > > Is this a problem with the KVM switch or with the Monitor using default > settings. Don't understand why it sees the monitor as unknown even when it > is the selected PC on the swich at boot up. > Hi Michael, some years ago I had similar problems (not with the model you mentioned). I could solve them by using a USB KVM switch with an *own power supply*. Kind regards -- Joachim Backes <joachim.backes@xxxxxxxxxxxxxx> http://www.rhrk.uni-kl.de/~backes
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
