On 09/18/2010 06:08 PM, Genes MailLists wrote: > > Anyone got any suggestions for this. > > I have a linksys sr2024 Gb switch > > Several things are plugged into this - all using cat 5e or cat 6 cables. > > > Some things are connecting with full Gb speed but the main firewall wont. > > The machine has 3 intel nic's - > > lspci | egrep -i ethernet > 04:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet > Controller (rev 01) > 05:04.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet > Controller (rev 05) > 05:05.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet > Controller (rev 05) > > The 82573 is on board and not used - the other 2 nic's are used - one > for internal subnet and one for external. > > The internet side is connected to a cisco 800 router (which I believe > is 10/100 only .. tho I cudnt swear for sure) > > The inside is connected to the SR2024 Gb switch. > > Both nic's come up in 100 Mb/s - I rebooted the switch, and I plugged > and unplugged the cables, I tried ethtool -r ethx a few times to no avail. Did you try ethtool -s ethX speed 1000 > Other machines on same switch are happily running at full gigabit speeds. > > Nothing in logs suggests a problem > > Is there a problem with multi nics of same brand where they need to run > at diff speeds ? Or is this a quirk with some hardware somewhere ? Or ??? > > > Appreciate any suggesions ... its getting tiring forcing renogiation! > > thanks ... > > gene/ -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
