Re: Modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Patrick,

Thought for a moment that your Modem was a Serial Modem, that would be supported through the native serial driver.  It might turn out to be a "WinModem" for which I would recommend downloading scanModem script by Marvin Stodlsky 

http://linmodems.technion.ac.il/packages/scanModem.gz

copy it to your linux partition/desktop
run
$ gunzip scanModem.gz
$ chmod +x scanModem
$ su -
passwd:

change to the directory where scanModem file is at and run
# ./scanModem

it will create a folder named Modem/ with some information.  Send me the file ModemData.txt to me (offlist prefered, since some folks on the list might be offended) and I can help out determine which driver you may use to get online.

Regards,

Antonio 

--- On Sat, 9/18/10, Patrick Dupre <pd520@xxxxxxxxxx> wrote:

> From: Patrick Dupre <pd520@xxxxxxxxxx>
> Subject: Re: Modem
> To: "Community support for Fedora users" <users@xxxxxxxxxxxxxxxxxxxxxxx>
> Cc: "Fedora List" <fedora-list@xxxxxxxxxx>
> Date: Saturday, September 18, 2010, 1:38 PM
> More information,
> 
> With the network manager, I switched to /dev/ttyS2 and it
> says that
> ppp0 is active, but it does not dial the provider number.
> RTNETLINK answers: No such process
> Warning: can't open options file /root/.ppprc: Permission
> denied
> 
> 
> I also get:
>   setserial /dev/ttyS2
> /dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
> 
> 
> and
>   wvdialconf /etc/wvdial.conf
> Editing `/etc/wvdial.conf'.
> 
> Scanning your serial ports for a modem.
> 
> Modem Port Scan<*1>:
> S0   S1   S2   S3
> 
> 
> Sorry, no modem was detected!  Is it in use by another
> program?
> Did you configure it properly with setserial?
> 
> >
> >
> > --- On Sat, 9/18/10, Patrick Dupre <pd520@xxxxxxxxxx>
> wrote:
> >
> >> From: Patrick Dupre <pd520@xxxxxxxxxx>
> >> Subject: Modem
> >> To: "Fedora List" <fedora-list@xxxxxxxxxx>
> >> Date: Saturday, September 18, 2010, 8:19 AM
> >>
> >> Hello,
> >>
> >> I am unable to activate a connection when using my
> modem
> >> (inspiron 9400 with fedora 13).
> >> (Modem conexant HDA DIOOMDC V.92 Modem CDM3)
> >>
> >> I am not sure that it is the right place to post
> this
> >> email, but maybe
> >> somebody can help me.
> >> I copied some of the configuration files.
> >>
> >> When I do ifup ppp0, I get:
> >> RTNETLINK,answers: No such process.
> >> pppd unrecognized option /dev/modem
> >>
> >> Thank for your help.
> >>
> >>
> >> /etc/ppd/ip-up
> >>
> >> #!/bin/bash
> >> # This file should not be modified -- make local
> changes
> >> to
> >> # /etc/ppp/ip-up.local instead
> >>
> >> PATH=/sbin:/usr/sbin:/bin:/usr/bin
> >> export PATH
> >>
> >> LOGDEVICE=$6
> >> REALDEVICE=$1
> >>
> >> [ -f
> /etc/sysconfig/network-scripts/ifcfg-${LOGDEVICE} ]
> >> &&
> /etc/sysconfig/network-scripts/ifup-post
> >> --realdevice ${REALDEVICE} ifcfg-${LOGDEVICE}
> >>
> >> /etc/ppp/ip-up.ipv6to4 ${LOGDEVICE}
> >>
> >> [ -x /etc/ppp/ip-up.local ] &&
> /etc/ppp/ip-up.local
> >> "$@"
> >>
> >> exit 0
> >> ++++++++++++++++++++++++++++++++++++++
> >> /etc/ppp/options
> >>
> >> lock
> >>
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> >> /etc/ppp/option.ppp
> >>
> >>
> ###############################################################################
> >> # $Id: options.pptp,v 1.3 2006/03/26 23:11:05
> quozl Exp $
> >> #
> >> # Sample PPTP PPP options file
> /etc/ppp/options.pptp
> >> # Options used by PPP when a connection is made by
> a PPTP
> >> client.
> >> # This file can be referred to by an
> /etc/ppp/peers file
> >> for the tunnel.
> >> # Changes are effective on the next connection. 
> See
> >> "man pppd".
> >> #
> >> # You are expected to change this file to suit
> your
> >> system.  As
> >> # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/
> >> # and the kernel MPPE module available from the
> CVS
> >> repository also on
> >> # http://ppp.samba.org/, which is packaged for DKMS as
> >> kernel_ppp_mppe.
> >>
> ###############################################################################
> >>
> >> # Lock the port
> >> lock
> >>
> >> # Authentication
> >> # We don't need the tunnel server to authenticate
> itself
> >> noauth
> >>
> >> # We won't do PAP, EAP, CHAP, or MSCHAP, but we
> will accept
> >> MSCHAP-V2
> >> # (you may need to remove these refusals if the
> server is
> >> not using MPPE)
> >> refuse-pap
> >> refuse-eap
> >> refuse-chap
> >> refuse-mschap
> >>
> >> # Compression
> >> # Turn off compression protocols we know won't be
> used
> >> nobsdcomp
> >> nodeflate
> >>
> >> # Encryption
> >> # (There have been multiple versions of PPP with
> encryption
> >> support,
> >> # choose with of the following sections you will
> use. 
> >> Note that MPPE
> >> # requires the use of MSCHAP-V2 during
> authentication)
> >>
> >> # http://ppp.samba.org/ the PPP project version of PPP
> by
> >> Paul Mackarras
> >> # ppp-2.4.2 or later with MPPE only, kernel
> module
> >> ppp_mppe.o
> >> # {{{
> >> # Require MPPE 128-bit encryption
> >> #require-mppe-128
> >> # }}}
> >>
> >> # http://polbox.com/h/hs001/ fork from PPP
> project by Jan
> >> Dubiec
> >> # ppp-2.4.2 or later with MPPE and MPPC, kernel
> module
> >> ppp_mppe_mppc.o
> >> # {{{
> >> # Require MPPE 128-bit encryption
> >> #mppe required,stateless
> >> # }}}
> >>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> /etc/ppp/wmdial.conf
> >>
> >> [Modem0]
> >> Modem = /dev/modem
> >> Baud = 57600
> >> SetVolume = 1
> >> Dial Command = ATDP
> >> Init1 = ATZ
> >> Init3 = ATM1L1
> >> FlowControl = CRTSCTS
> >> [Dialer SFR]
> >> Username = tele2@xxxxxxxx
> >> Password = mys
> >> Phone = 0860652000
> >> Stupid Mode = 1
> >> Init1 = ATZ
> >> Inherits = Modem0
> >> +++++++++++++++++++++++++++++++++++++++++++++++++
> >>
> >> /etc/ppp/peers/SFR
> >>
> >> connect "/usr/bin/wvdial --remotename SFR --chat
> 'SFR'"
> >>
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>
> >> /etc/ppp/peers/wmdial
> >>
> >> noauth
> >> name wvdial
> >> usepeerdns
> >>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>
> >>
> >>
> >> -- ---
> >>
> ==========================================================================
> >>  Patrick DUPRÉ           
> >>           |   |
> >>  Department of Chemistry         
> >>   |   |    Phone:
> >> (44)-(0)-1904-434384
> >>  The University of York         
> >>    |   |   
> >> Fax:   (44)-(0)-1904-432516
> >>  Heslington             
> >>        
> >>    |   |
> >>  York YO10 5DD  United Kingdom     
> >> |   |    email: pd520@xxxxxxxxxx
> >>
> ==========================================================================
> >> -----Inline Attachment Follows-----
> >>
> >
> >
> > Patrick,
> >
> > If the modem you have referenced above, then please do
> the following to see if you can get connected:
> > Fire up a terminal and run
> >
> > $ su -
> > passwd:
> > # wvdialconf /etc/wvdial.conf
> >
> > if a modem is found, could be /dev/ttyS0 ...
> /dev/ttyS3?   then proceed to edit
> /etc/wvdial.conf and add your username, ISP phone no, and
> Password. then after you are done save that file and try
> >
> > # wvdial
> >
> > check to see if you can connect?  If you cannot
> edit the file /etc/resolv.conf by pasting the numbers output
> by wvdial that show up when it is connected.  Add these
> with to the file /etc/resolv.conf with the word nameserver
> in front of them.  Let me know if this helped or not.
> >
> > Regards,
> >
> >
> > Antonio
> >
> >
> >
> >
> 
> -- 
> ---
> ==========================================================================
>   Patrick DUPRÉ         
>            
> |   |
>   Department of Chemistry       
>     |   |    Phone:
> (44)-(0)-1904-434384
>   The University of York       
>      |   |   
> Fax:   (44)-(0)-1904-432516
>   Heslington           
>          
>    |   |
>   York YO10 5DD  United Kingdom   
>   |   |    email: pd520@xxxxxxxxxx
> ==========================================================================
> -----Inline Attachment Follows-----
> 
> -- 
> users mailing list
> users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> 


      
-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines


[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux