Hi Paolo, Below is the lspci output: $ lspci -v 00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Device 0046 (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0, IRQ 32 Memory at b0000000 (64-bit, non-prefetchable) [size=4M] Memory at a0000000 (64-bit, prefetchable) [size=256M] I/O ports at 3050 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel modules: i915 00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at b4406100 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at b4405c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Ibex Peak High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at b4400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: b3400000-b43fffff Prefetchable memory behind bridge: 00000000b0400000-00000000b13fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: b2400000-b33fffff Prefetchable memory behind bridge: 00000000b1400000-00000000b23fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, medium devsel, latency 0, IRQ 20 Memory at b4405800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> 00:1f.2 SATA controller: Intel Corporation Ibex Peak 4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 31 I/O ports at 3048 [size=8] I/O ports at 305c [size=4] I/O ports at 3040 [size=8] I/O ports at 3058 [size=4] I/O ports at 3020 [size=32] Memory at b4405000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 146a Flags: medium devsel, IRQ 19 Memory at b4406000 (64-bit, non-prefetchable) [size=256] I/O ports at 3000 [size=32] Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation Ibex Peak Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at b4404000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0, IRQ 33 I/O ports at 2000 [size=256] Memory at b0404000 (64-bit, prefetchable) [size=4K] Memory at b0400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 02:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) Subsystem: Hewlett-Packard Company Device 145c Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> ff:00.0 Host bridge: Intel Corporation Device 2c62 (rev 02) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0 ff:00.1 Host bridge: Intel Corporation Device 2d01 (rev 02) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0 ff:02.0 Host bridge: Intel Corporation Device 2d10 (rev 02) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0 ff:02.1 Host bridge: Intel Corporation Device 2d11 (rev 02) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0 ff:02.2 Host bridge: Intel Corporation Device 2d12 (rev 02) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0 ff:02.3 Host bridge: Intel Corporation Device 2d13 (rev 02) Subsystem: Hewlett-Packard Company Device 146a Flags: bus master, fast devsel, latency 0 On Thu, Aug 26, 2010 at 5:12 PM, Paolo Galtieri <pgaltieri@xxxxxxxxx> wrote: > On 08/26/2010 04:52 PM, abhijeet tripathi wrote: >> Hi, >> >> I tried installing FC-12 on my laptop which is having i5-430M >> processor. The installation got hung initially then I again restarted >> it with the basic graphics driver and the installation happened >> successfully. >> >> Now I am having following problems. Please help me to resolve it: >> >> 1. How to enable Intel HD Graphics? >> 2. The mousepad is multitouch. Which package i need to install to get >> it working. >> 3. The wireless LAN is of broadcom. What to do to get it working. >> >> Let me know if you need any information. >> >> Thank you, >> Abhijeet > > Can you provide the output of lspci? Does your laptop have a hardwired > network connection? Does it work? Is there any information in > /var/log/messages or /var/log/boot.log /var/log/dmesg? > > Paolo > -- > users mailing list > users@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe or change subscription options: > https://admin.fedoraproject.org/mailman/listinfo/users > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines > --Abhijeet -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
