<snip> >> I have tried all of the PPD drivers that the printer >> setup gui provides for this printer. None of them >> has helped. Printer does not have any problems >> printing under windows xp, so that rules out printer >> hardware issues. >> </snip> Hi JD The problem will more likely be not using the correct ppd file. I suspect you need a PCL ppd file As with my system the ppd files supplied in Fedora do not work well, I had to get the correct ppd from the printer manufacturer's site. Having said that you really should have no problem with HP LaserJet 4, others use that printer ok. 4 updates ago in Fedora 11 it changed my FX C2100 DocuPrint ppd to the HP LaserJet 4 ppd driver and it still worked but then a subsequent update made it fail and I had to resort to manual install of the appropriate ppd file as per below. Hope this helps. Roger ------------------===============----------------- <snip> > I have a Xerox Phaser 6130 printer. It does not seem to be recognized > by my F13 install (fully updated on a Dell Dimension desktop). I can > go to Admin -> Printing, but the only options are printer port or > serial port. I could also specify a URI, but I do not know what the > URI specification for the printer should be. Usb://..something, but I > don't know how to determine the "something" part. </snip> --------=======--- This seems to be a problem with USB Xerox printers in Fedora. I too have had the same problems since Fedora 9 and10. Ubuntu 10.4 just installed it without any effort on my part. You have to have system-config-printers, Foomatic, cups printers, etc installed and you have to go to the Xerox site and get the appropriate ppd file. For my Fuji Xeros C2100 I needed .. PCL_DocuPrint-C2100.ppd. It's a plain text file. Install this in /usr/share/cups/model/ There are also pxlcolor.ppd, pxlmono.ppd, textonly.ppd in that directory. In the <System><administration><Printers> select the parallel port option so your printer is recognised by the computer. Select "Provide ppd" option and navigate to the ppd that you installed as above. Your computer should then find the printer and list it in the printers If you go to printer properties you should see the printer listed in the Device URI as something like this usb://FUJI%20XEROX/DocuPrint%20C2100 which is my Device URI The printer should work Unfortunately Fedora do not provide a usb printer selection option so its gotta be done through the back door manually. Hope this helps Roger -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
