I've installed a wireless nic that is rt2860 based. I've downloaded, compiled, and installed the latest rt2860koa "driver" on my Fedora 12 x64 machine. It loads (lsmod shows it), lspci shows that the RealTek nic is using the driver, but I can't get it to connect to my wireless AP. I can set the ssid but wpa_supplicant never connects (trying this at the command line with "wpa_supplicant -ira0 -Dwext -dd -K -c /etc/wpa_supplicant/wpa_supplicant.conf" ). I notice that there's a wpa_supplicant running as a daemon but every time I kill it it respawns (I assume dbus is doing this but I can't figure out how to stop dbus from doing this). I don't know if that's part of the problem or not. This is *very* annoying as the d*mn card works find under Windows 7 (of course) but not under F12. What I've done is: iwconfig ra0 essid "sidname" wpa_supplicant -ira0 -Dwext -dd -K -c /etc/wpa_supplicant/wpa_supplicant.conf dhclient ra0 I've tried configuring the wpa_supplicant.conf file with the psk in cleartext and hex and the same goes for the /etc/Wireless/RT2860STA/RT2860STA.dat file. *Once*, just *once*, I had this actually connected but have no idea how it did it. FWIW, the kernel is the 2.6.32.9-70 version. Any help, thoughts, or prayers appreciated. Kevin -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
