Am Dienstag, den 09.03.2010, 23:23 +0700 schrieb Rashedul Arefin: > I want to install GNS3 on Fedora 12. Can anyone provide me the step by > step guidelines for this? Make it work in five minutes (mostly, learning GNS3, nice, thanks). a) yum install xterm telnet PyQt4 b) downloaded and untarred GNS3 source from http://downloads.sourceforge.net/gns-3/GNS3-0.7-src.tar.bz2?download c) download dynamips 2.8RC1, copy inside GNS3 dir $ wget http://www.ipflow.utc.fr/dynamips/dynamips-0.2.8-RC2-x86.bin d) installed dynagen just in case http://sourceforge.net/projects/dyna-gen/files/dynagen%20source%20_% 20Linux/dynagen%200.11.0/dynagen-0.11.0-1.fc9.noarch.rpm/download e) maybe you should install qemu, dont know if it is needed for more routers. I make a cisco ios work fine without it. f) create an ios directory inside GNS3's. Put some IOS there. g) configure steps 1 and 2, requested by GNS3. h) ./gns3 Thanks for the tip, didn't know GNS3. Cheers. ---------------------------------------------- Rodolfo Alcazar Portillo - nospaze@xxxxxxxxx otbits.blogspot.com / counter.li.org: #367962 ---------------------------------------------- "Sorry, we don't support the worship of gods on this list, we only support the worship of penguins." "what about us agnustics?" -- Russell Coker and Graham Wilson -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
