> Are you sure you have packet forwarding enabled? > What does 'sysctl -a | grep forward' say? sysctl -a | grep forward net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.conf.lo.forwarding = 1 net.ipv4.conf.lo.mc_forwarding = 0 net.ipv4.conf.eth1.forwarding = 1 net.ipv4.conf.eth1.mc_forwarding = 0 net.ipv4.conf.eth0.forwarding = 1 net.ipv4.conf.eth0.mc_forwarding = 0 net.ipv4.conf.eth2.forwarding = 1 net.ipv4.conf.eth2.mc_forwarding = 0 net.ipv4.conf.eth3.forwarding = 1 net.ipv4.conf.eth3.mc_forwarding = 0 net.ipv4.conf.sit0.forwarding = 1 net.ipv4.conf.sit0.mc_forwarding = 0 net.ipv4.ip_forward = 1 net.ipv6.conf.all.forwarding = 0 net.ipv6.conf.all.mc_forwarding = 0 net.ipv6.conf.default.forwarding = 0 net.ipv6.conf.default.mc_forwarding = 0 net.ipv6.conf.eth1.forwarding = 0 net.ipv6.conf.eth1.mc_forwarding = 0 net.ipv6.conf.sit0.forwarding = 0 net.ipv6.conf.sit0.mc_forwarding = 0 net.ipv6.conf.lo.forwarding = 0 net.ipv6.conf.lo.mc_forwarding = 0 net.ipv6.conf.eth2.forwarding = 0 net.ipv6.conf.eth2.mc_forwarding = 0 net.ipv6.conf.eth0.forwarding = 0 net.ipv6.conf.eth0.mc_forwarding = 0 net.ipv6.conf.eth3.forwarding = 0 net.ipv6.conf.eth3.mc_forwarding = 0 === net.ipv4.ip_forward = 1. Is it sufficient? Thank you... > ------------ Původní zpráva ------------ > Od: Bruno Wolff III <bruno@xxxxxxxx> > Předmět: Re: Routing problems > Datum: 20.2.2010 16:52:22 > ---------------------------------------- > On Thu, Feb 18, 2010 at 07:31:56 +0100, > "j.halifax ." <j.halifax@xxxxxxxxx> wrote: > > > > >From the LAN default GW (10.255.250.37) > > - I can ping 172.17.1.50: > > PING 172.17.1.50 (172.17.1.50) 56(84) bytes of data. > > 64 bytes from 172.17.1.50: icmp_seq=1 ttl=253 time=5.62 ms > > 64 bytes from 172.17.1.50: icmp_seq=2 ttl=253 time=3.29 ms > > > > >From other boxes in the same LAN (e.g. 10.255.250.38) > > - I cann't ping 172.17.1.50 > > - I cann't traceroute 172.17.1.50: It goes to LAN default GW > > 10.255.250.37 and then to its default GW dsl-router on eth0 > > instead of eth3 (so that the routing rule for 172.17.0.0 doesn't > > match for 172.17.1.50) > > > > Can anybody help pleasee? > > Are you sure you have packet forwarding enabled? > What does 'sysctl -a | grep forward' say? > > > ------------ Původní zpráva ------------ > Od: Bruno Wolff III <bruno@xxxxxxxx> > Předmět: Re: Routing problems > Datum: 20.2.2010 16:52:22 > ---------------------------------------- > On Thu, Feb 18, 2010 at 07:31:56 +0100, > "j.halifax ." <j.halifax@xxxxxxxxx> wrote: > > > > >From the LAN default GW (10.255.250.37) > > - I can ping 172.17.1.50: > > PING 172.17.1.50 (172.17.1.50) 56(84) bytes of data. > > 64 bytes from 172.17.1.50: icmp_seq=1 ttl=253 time=5.62 ms > > 64 bytes from 172.17.1.50: icmp_seq=2 ttl=253 time=3.29 ms > > > > >From other boxes in the same LAN (e.g. 10.255.250.38) > > - I cann't ping 172.17.1.50 > > - I cann't traceroute 172.17.1.50: It goes to LAN default GW > > 10.255.250.37 and then to its default GW dsl-router on eth0 > > instead of eth3 (so that the routing rule for 172.17.0.0 doesn't > > match for 172.17.1.50) > > > > Can anybody help pleasee? > > Are you sure you have packet forwarding enabled? > What does 'sysctl -a | grep forward' say? > > > -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
