> Please post
> * Full details of your network
> * The routing table, uncensored :)
route
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.180.0 * 255.255.255.0 U 0 0 0 eth3
10.200.1.0 10.255.250.250 255.255.255.0 UG 0 0 0 eth2
195.39.130.0 * 255.255.255.0 U 0 0 0 eth0
10.1.1.0 10.255.250.250 255.255.255.0 UG 0 0 0 eth2
10.201.1.0 10.255.250.250 255.255.255.0 UG 0 0 0 eth2
10.255.250.0 * 255.255.255.0 U 0 0 0 eth2
link-local * 255.255.0.0 U 1003 0 0 eth0
link-local * 255.255.0.0 U 1004 0 0 eth2
link-local * 255.255.0.0 U 1005 0 0 eth3
172.17.0.0 192.168.180.100 255.255.0.0 UG 0 0 0 eth3
192.168.0.0 192.168.180.100 255.255.0.0 UG 0 0 0 eth3
default pc89.n 0.0.0.0 UG 0 0 0 eth0
ifconfig
eth0 Link encap:Ethernet HWaddr 00:1B:11:B1:5D:0D
inet addr:195.39.130.92 Bcast:195.39.130.255 Mask:255.255.255.0
inet6 addr: fe80::21b:11ff:feb1:5d0d/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:5174154 errors:0 dropped:0 overruns:0 frame:0
TX packets:3474632 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2851269308 (2.6 GiB) TX bytes:646868735 (616.9 MiB)
Interrupt:21 Base address:0xca00
eth2 Link encap:Ethernet HWaddr 00:19:5B:38:B7:36
inet addr:10.255.250.37 Bcast:10.255.250.255 Mask:255.255.255.0
inet6 addr: fe80::219:5bff:fe38:b736/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:18187178 errors:0 dropped:0 overruns:0 frame:0
TX packets:2506338 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1585335954 (1.4 GiB) TX bytes:1901082841 (1.7 GiB)
Interrupt:22 Base address:0xa900
eth3 Link encap:Ethernet HWaddr 00:1B:11:B1:1C:D4
inet addr:192.168.180.100 Bcast:192.168.180.255 Mask:255.255.255.0
inet6 addr: fe80::21b:11ff:feb1:1cd4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2048995 errors:0 dropped:0 overruns:0 frame:0
TX packets:4746 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:201714109 (192.3 MiB) TX bytes:364982 (356.4 KiB)
Interrupt:18 Base address:0x6800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:255570 errors:0 dropped:0 overruns:0 frame:0
TX packets:255570 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:25105805 (23.9 MiB) TX bytes:25105805 (23.9 MiB)
Thanx. :)
> ------------ Původní zpráva ------------
> Od: Andrew Haley <aph@xxxxxxxxxx>
> Předmět: Re: Routing problems
> Datum: 18.2.2010 12:31:34
> ----------------------------------------
> On 02/18/2010 11:19 AM, j.halifax . wrote:
> >> What is the address of the subnet "other LAN" ?
> >> There seem to be two more subnets, 192.168.180.0 and 172.17.0.0.
> > You are right, both of them are accessible through eth3 and the same
> > box of 192.168.180.100 (I didn't include the whole routing table) like:
> > 172.17.0.0 192.168.180.100 255.255.0.0 UG 0 0 0 eth3
> > 192.168.0.0 192.168.180.100 255.255.0.0 UG 0 0 0 eth3.
>
> Please post
>
> * Full details of your network
> * The routing table, uncensored
>
> >> ------------ Původní zpráva ------------
> >> Od: Andrew Haley <aph@xxxxxxxxxx>
> >> Předmět: Re: Routing problems
> >> Datum: 18.2.2010 11:51:17
> >> ----------------------------------------
> >> On 02/18/2010 10:01 AM, Rick Sewill wrote:
> >>> On Thu, 2010-02-18 at 07:31 +0100, j.halifax . wrote:
> >>>> Hi All,
> >>>>
> >>>> Could you please help me with routing in the LAN default GW box?
> >>>>
> >>>> I have
> >>>> eth0 connected to Internet
> >>>> eth2 to internal LAN 10.255.250.0
> >>>> LAN default GW is 10.255.250.37
> >>>> eth3 connected to other LAN
> >>
> >> What is the address of the subnet "other LAN" ?
> >>
> >> There seem to be two more subnets, 192.168.180.0 and 172.17.0.0.
> >>
> >> Andrew.
> >>
> >>
> >>
> >>>> Route in the default GW (10.255.250.37):
> >>>>
> >>>> Destination Gateway Genmask Flags Metric Ref Use
> >> Iface
> >>>> 192.168.180.0 * 255.255.255.0 U 0 0
>
> >> 0 eth3
> >>>> 10.255.250.0 * 255.255.255.0 U 0 0
>
> >> 0 eth2
> >>>> link-local * 255.255.0.0 U 1003
> 0
> >> 0 eth0
> >>>> link-local * 255.255.0.0 U 1004
> 0
> >> 0 eth2
> >>>> link-local * 255.255.0.0 U 1005
> 0
> >> 0 eth3
> >>>> 172.17.0.0 192.168.180.100 255.255.0.0 UG 0 0 0
>
> >> eth3
> >>>> default dsl-router 0.0.0.0 UG 0
> 0
> >> 0 eth0
> >>>>
> >>>> >From the LAN default GW (10.255.250.37)
> >>>> - I can ping 172.17.1.50:
> >>>> PING 172.17.1.50 (172.17.1.50) 56(84) bytes of data.
> >>>> 64 bytes from 172.17.1.50: icmp_seq=1 ttl=253 time=5.62 ms
> >>>> 64 bytes from 172.17.1.50: icmp_seq=2 ttl=253 time=3.29 ms
> >>>>
> >>>> >From other boxes in the same LAN (e.g. 10.255.250.38)
> >>>> - I cann't ping 172.17.1.50
> >>>> - I cann't traceroute 172.17.1.50: It goes to LAN default GW
> >>>> 10.255.250.37 and then to its default GW dsl-router on eth0
> >>>> instead of eth3 (so that the routing rule for 172.17.0.0
> doesn't
> >>
> >>>> match for 172.17.1.50)
> >>>>
> >>>> Can anybody help pleasee?
> >>>> Thank you so much!
> >>>> jh
> >>>>
> >>>
> >>> Your problem has me stumped.
> >>>
> >>> The only thing I can think of is to ask how iptables is set up.
> >>>
> >>> I think you have iptables doing masquerading to the eth0 interface.
> >>> The masquerading shouldn't be the problem.
> >>>
> >>> Are you doing anything special with packets coming in eth2 in iptables?
> >>>
> >>> I assume 10.255.250.38 can ping the Internet so you have routing set up.
> >>>
> >>> I can't think of anything else to check at this moment.
> >>>
> >>> Hopefully others will have better suggestions and ideas where to look.
> >>>
> >>>
> >>>
> >>
> >> --
> >> users mailing list
> >> users@xxxxxxxxxxxxxxxxxxxxxxx
> >> To unsubscribe or change subscription options:
> >> https://admin.fedoraproject.org/mailman/listinfo/users
> >> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> >>
> >>
> >>
>
> --
> users mailing list
> users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>
>
>
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
