- Using Fedora 12. - Linux 2.6.31.5-127.fc12.x86_64 #1 SMP Sat Nov 7 21:11:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux - Tried switching between two cards, cables, ports, switches, ethtool in different autoneg/1000/100 configs using all other known good hardware. - skge driver gives no errors, no errors with dmesg. - tried the first card against numerous configs and it would occassionally get packets through, but very very rarely. 100mbit was slightly more likely to work than gig, and 10mbit never worked. - decided first card was DOA and exchanged. Second card behaves similarly to first... slightly better. A few times it started working and ran for half an hour, even if link disconnected, reconnected, etc. Much more likely to work at 100mbit. - Second card, TX almost always got packet through, RX would count packets but seldom would kernel receive them. - No errors showing with ifconfig. D-Link claims card works with linux. Hard to believe two cards in a row would be defective in similar way unless it is a systematic manufacturing problem. I'm somewhat suspicious of the driver/interrupt delivery since no errors are ever reported despite packet count showing arrivals. Does anyone have experience with getting this GigE adapter working? Is it likely a defective card, or is this a problem with Fedora 12? - Mike -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
