On Mon, Jan 25, 2010 at 7:07 PM, Mikkel <mikkel@xxxxxxxxxxxxxxxx> wrote: > On 01/23/2010 10:51 PM, Bill Davidsen wrote: >> Marcel Rieux wrote: >>> Since the NVIDIA forums are just a lost of time, I'll first ask the >>> question here. >>> >>> I have an NVIDIA 9400GT card and a Sony LCD TV linked with an HDMI cable. >>> >>> First problem I found: the S/PDIF cable -- which is needed only with >>> NVIDIA cards -- wasn't installed. The plug had a molding problem and >>> one of the 4 holes was blocked. (The hole was just empty: no wire >>> going to it.) I opened it with a pin, installed it with the arrow >>> facing the closest part of the motherboard, reversed it, and, of >>> course, sound doesn't come out of the TV. It's an Nvidia product! >>> >>> Anybody got this working? >> >> Did you get PulseAudio to send output to the connector? Many times this is a PA >> config issue. >> > One thing to keep in mind when configuring PA to output over the > HDMI cable is that this is a digital output. The default > configuration is to use the analog output, because this is what most > people use. (Speakers hooked to the line out jack.) > PA supports both analog and digital output, but you have to select > the one you want. As I said, when I select digital output, there is no output whatsoever, computer or tv. Is an additional driver needed? -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
