On 12/14/2009 11:02 PM, R. G. Newbury wrote:
Simon wrote:
>>>>> At my brothers place I managed to connect to the internet with no
>>>>> >>>>> problem. All programmes worked, so I could add all the
additional
>>>>> >>>>> programs I needed and install the latest updates.
>
>Meanwhile, the wired connection works (was it because I manually added
>the DNS???, anyway it works), but the wired connection still doesn't
>work.
I presume you actually meant the *wireless connection stll doesn't work".
>Here's what I get with ifconfig.
>[root@sangam simon]# ifconfig eth0
>eth0 Link encap:Ethernet HWaddr 00:1A:6B:CE:85:A7
inet addr:192.168.1.33 Bcast:192.168.1.255
Mask:255.255.255.0
inet6 addr: fe80::21a:6bff:fece:85a7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7852 errors:0 dropped:0 overruns:0 frame:0
TX packets:6432 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:6456499 (6.1 MiB) TX bytes:815876 (796.7 KiB)
Memory:fe200000-fe220000
We really need the full output of ifconfig. What does 'ifconfig wlan0'
give?
[simon@sangam ~]$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:13:E8:82:76:33
inet addr:192.168.1.34 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:e8ff:fe82:7633/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6453 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:429676 (419.6 KiB) TX bytes:13316 (13.0 KiB)
[simon@sangam ~]$
>And here is what I get with netstat -rn:
>[root@sangam simon]# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
wlan0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0
eth0
*This looks fine!* ifconfig should show Up addresses for BOTH
interfaces. If it does not, then we have one sort of problem. If it
does, but you cannot connect wirelessly, then it means another sort of
problem, probably related to security or encryption.
>As for wicd: I used that when working with Ubuntu and was always quite
happy. So let's give it a try:
<snip>
>My, my. What a headache. These thing make me feel kind of lost...
>Simon
Yes. It is actually simpler to download the 2 packages from
wicd.sourceforge.net, and make && make install. That avoids the sort
of conflicts you got.
Please post 'ifconfig wlan0'. Use system-config-network to configure
the wireless interface. If you get wicd installed, then do a
'chkconfig wicd on' and 'service wicd start', then use the desktop
icon for wicd-client, and configure the wireless card there too.
It usually helps to start by turning OFF all wireless security on the
router and on the laptop, while you get the rest of it working, then
add MAC filtering and WPA keys etc. last.
Sounds like you are actually quite close. Once wired is working, the
universe of points of screwup gets a lot smaller!
Geoff
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
