Hi people, i have just installed fedora 12 on my acer Aspire 6930, and everything go fine... (overwriting a perfectly running Fedora11 :) ) but when i reboot the machine it taken very long times to complete the boot procedure... so i have installed bootchart, to look where it takes so long... you could look at it here "http://dl.dropbox.com/u/313729/bootchart_tegamino.png"; so it seems that my kernel losses for mor than 70 seconds looking for someting... (more if bootchart is not installed...) so i wached dmesg... in seach for tips... there seem to be an HPET timer problem... could somone help??? (dmesg attachment) Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.5-127.fc12.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bdaa1000 (usable) BIOS-e820: 00000000bdaa1000 - 00000000bdaa7000 (reserved) BIOS-e820: 00000000bdaa7000 - 00000000bdbba000 (usable) BIOS-e820: 00000000bdbba000 - 00000000bdc0f000 (reserved) BIOS-e820: 00000000bdc0f000 - 00000000bdd08000 (usable) BIOS-e820: 00000000bdd08000 - 00000000bdf0f000 (reserved) BIOS-e820: 00000000bdf0f000 - 00000000bdf19000 (usable) BIOS-e820: 00000000bdf19000 - 00000000bdf1f000 (reserved) BIOS-e820: 00000000bdf1f000 - 00000000bdf64000 (usable) BIOS-e820: 00000000bdf64000 - 00000000bdf9f000 (ACPI NVS) BIOS-e820: 00000000bdf9f000 - 00000000bdfe2000 (usable) BIOS-e820: 00000000bdfe2000 - 00000000bdfff000 (ACPI data) BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI present. last_pfn = 0x140000 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 100000000 mask FC0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-00000000375fe000 NX (Execute Disable) protection: active 0000000000 - 0000200000 page 4k 0000200000 - 0037400000 page 2M 0037400000 - 00375fe000 page 4k kernel direct mapping tables up to 375fe000 @ 7000-f000 RAMDISK: 37533000 - 37fefb5a Allocated new RAMDISK: 00afb000 - 015b7b5a Move RAMDISK from 0000000037533000 - 0000000037fefb59 to 00afb000 - 015b7b59 ACPI: RSDP 000f74b0 00024 (v02 PTLTD ) ACPI: XSDT bdff63d2 0007C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) ACPI: FACP bdfe6000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT bdfe7000 08597 (v02 Intel CANTIGA 06040000 INTL 20061109) ACPI: FACS bdf9efc0 00040 ACPI: HPET bdffed1b 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG bdffed53 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: APIC bdffed8f 00068 (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: BOOT bdffedf7 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC bdffee1f 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000) ACPI: ASF! bdffef95 0006B (v32 OEMID OEMTBL 06040000 PTL 00000001) ACPI: SSDT bdff6476 001A6 (v01 SataRe SataAhci 00001000 INTL 20061109) ACPI: SSDT bdfe5000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: SSDT bdfe4000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT bdfe3000 0020F (v01 PmRef ApTst 00003000 INTL 20061109) ACPI: Local APIC address 0xfee00000 4234MB HIGHMEM available. 885MB LOWMEM available. mapped low ram: 0 - 375fe000 low ram: 0 - 375fe000 node 0 low ram: 00000000 - 375fe000 node 0 bootmap 0000b000 - 00011ec0 (9 early reservations) ==> bootmem [0000000000 - 00375fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000af1210] TEXT DATA BSS ==> [0000400000 - 0000af1210] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [0000af2000 - 0000afa154] BRK ==> [0000af2000 - 0000afa154] #6 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] #7 [0000afb000 - 00015b7b5a] NEW RAMDISK ==> [0000afb000 - 00015b7b5a] #8 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000] found SMP MP-table at [c00f7590] f7590 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000375fe HighMem 0x000375fe -> 0x00140000 Movable zone start PFN for each node early_node_map[9] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bdaa1 0: 0x000bdaa7 -> 0x000bdbba 0: 0x000bdc0f -> 0x000bdd08 0: 0x000bdf0f -> 0x000bdf19 0: 0x000bdf1f -> 0x000bdf64 0: 0x000bdf9f -> 0x000bdfe2 0: 0x000bdfff -> 0x000be000 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1039583 free_area_init_node: node 0, pgdat c0995ba0, node_mem_map c15b8000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 8469 pages used for memmap HighMem zone: 804397 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at be000000 (gap: be000000:42000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 15 pages at c3dc8000, static data 37788 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029342 Kernel command line: ro root=/dev/mapper/vg_tegamino-lv_root LANG=it_IT.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=it rhgb quiet PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 26214400 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000375fe:00140000) Memory: 4071724k/5242880k available (3569k kernel code, 85724k reserved, 2214k data, 448k init, 3251464k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc09a7000 - 0xc0a17000 ( 448 kB) .data : 0xc077c76f - 0xc09a6028 (2214 kB) .text : 0xc0400000 - 0xc077c76f (3569 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2127.930 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.86 BogoMIPS (lpj=2127930) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20611 entries in 41 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4255.77 BogoMIPS (lpj=2127887) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8511.63 BogoMIPS). sizeof(vma)=88 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=500 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=192 bytes sizeof(task_struct)=3256 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 18:36:47 Date: 11/26/09 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xfdca1, last bus=10 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: missing confirmations, switch off interrupt mode. ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0404800-0xf0404bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0404c00-0xf0404fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0404000-0xf04047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x001fff] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:00:1c.3: bridge io port: [0x00-0xfff] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:09:00.0: reg 10 64bit mmio: [0x000000-0x03ffff] pci 0000:09:00.0: reg 18 io port: [0x00-0x7f] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0x00-0xfff] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes pci 0000:00:1c.0: BAR 13: can't allocate resource pci 0000:00:1c.0: BAR 14: can't allocate resource pci 0000:00:1c.0: BAR 15: can't allocate resource pci 0000:00:1c.3: BAR 13: can't allocate resource pci 0000:00:1c.3: BAR 14: can't allocate resource pci 0000:00:1c.3: BAR 15: can't allocate resource pci 0000:00:1c.5: BAR 13: can't allocate resource pci 0000:00:1c.5: BAR 14: can't allocate resource pci 0000:00:1c.5: BAR 15: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling pnp 00:04: io resource (0x61-0x61) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling pnp 00:04: io resource (0x63-0x63) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling pnp 00:04: io resource (0x65-0x65) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling pnp 00:04: io resource (0x67-0x67) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling pnp 00:04: io resource (0x68-0x6f) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling pnp 00:04: io resource (0x70-0x70) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved system 00:04: ioport range 0x680-0x69f has been reserved system 00:04: ioport range 0x480-0x48f has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1180-0x11ff has been reserved system 00:04: ioport range 0x164e-0x164f has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0x400-0x47f has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved system 00:09: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0xc0000000-0xc00fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: 0x3000-0x3fff pci 0000:00:1c.5: MEM window: 0xc0100000-0xc01fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0000 -> 0002) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: enabling device (0000 -> 0003) pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] pci_bus 0000:07: resource 0 mem: [0x0-0xfff] pci_bus 0000:07: resource 1 mem: [0xc0000000-0xc00fffff] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff] pci_bus 0000:09: resource 0 io: [0x3000-0x3fff] pci_bus 0000:09: resource 1 mem: [0xc0100000-0xc01fffff] pci_bus 0000:09: resource 2 mem: [0x0-0xfffff] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 10994k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1259260607.068:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1625 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered ACPI: AC Adapter [ACAD] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 ACPI: Sleep Button [SLPB] ACPI: SSDT bdf1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT bdf19620 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT bdf1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: SSDT bdf1af20 0008D (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (22 C) isapnp: Scanning for PnP cards... ACPI: Battery Slot [BAT1] (battery absent) isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404100 irq 28 ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 28 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404300 irq 28 ata6: SATA max UDMA/133 abar m2048@0xf0404000 port 0xf0404380 irq 28 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0404800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0404c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 1:476:646 scsi_host host0: hash matches scsi host0: hash matches rtc_cmos 00:05: setting system clock to 2009-11-26 18:36:48 UTC (1259260608) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) usb 1-2: new high speed USB device using ehci_hcd and address 2 usb 1-2: New USB device found, idVendor=0bda, idProduct=0158 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: USB2.0-CRW usb 1-2: Manufacturer: Generic usb 1-2: SerialNumber: 20071114173400000 usb 1-2: configuration #1 chosen from 1 choice Clocksource tsc unstable (delta = -219857252 ns) usb 1-6: new high speed USB device using ehci_hcd and address 4 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 ata2.00: ATAPI: Optiarc DVD RW AD-7560S, SX07, max UDMA/100, ATAPI AN ata2.00: configured for UDMA/100 usb 1-6: New USB device found, idVendor=5986, idProduct=0105 usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 1-6: Product: Acer Crystal Eye webcam usb 1-6: Manufacturer: USB Audio Device usb 1-6: configuration #1 chosen from 1 choice ACPI Warning: \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 ata1.00: _GTF unexpected object type 0x1 ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: New USB device found, idVendor=147e, idProduct=1000 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Fingerprint Sensor usb 4-2: Manufacturer: TouchStrip usb 4-2: configuration #1 chosen from 1 choice ata1.00: _GTF unexpected object type 0x1 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7560S SX07 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 448k freed Write protecting the kernel text: 3572k Write protecting the kernel read-only data: 1716k dracut: dracut-002-13.4.git8f397a9b.fc12 udev: starting version 145 [drm] Initialized drm 1.1.0 20060810 nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096480a1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 62.94.3c.00 [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:01:00.0: G80+ LVDS not initialized by driver; ignoring conf bits [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD51F [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD910 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE8D9 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA22 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEC8A [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xECEF [drm] nouveau 0000:01:00.0: 0xECEF: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: 0xB9B8: parsing output script 0 [TTM] Zone kernel: Available graphics memory: 416292 kiB. [TTM] Zone highmem: Available graphics memory: 2042024 kiB. [drm] nouveau 0000:01:00.0: 512 MiB VRAM [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Detected a LVDS output [drm] nouveau 0000:01:00.0: Detected a LVDS connector [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40250000, bo f65ffa00 fbcon: nouveaufb (fb0) is primary device [drm] LVDS-7: set mode 1366x768 14 [drm] nouveau 0000:01:00.0: 0xB9BC: parsing output script 1 [drm] nouveau 0000:01:00.0: 0xB84F: parsing clock script 0 Console: switching to colour frame buffer device 170x48 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 dracut: Starting plymouth daemon Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [drm] nouveau 0000:01:00.0: 0xB9B3: parsing clock script 1 usb-storage: device scan complete scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk dracut: Scanning devices sda2 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_tegamino" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "vg_tegamino" now active EXT4-fs (dm-0): barriers enabled kjournald2 starting: pid 18979, dev dm-0:8, commit interval 5 seconds EXT4-fs (dm-0): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_tegamino-lv_root dracut: Loading SELinux policy SELinux: 8192 avtab hash slots, 146844 rules. SELinux: 8192 avtab hash slots, 146844 rules. SELinux: 8 users, 12 roles, 2956 types, 136 bools, 1 sens, 1024 cats SELinux: 75 classes, 146844 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs type=1400 audit(1259260854.493:2): avc: denied { associate } for pid=98 comm="udevd" name="\x2fdevices\x2fpci0000:00\x2f0000:00:1f.2\x2fhost1\x2ftarget1:0:0\x2f1:0:0:0\x2fblock\x2fsr0" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=filesystem SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1259260854.516:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0105) input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) type=1400 audit(1259257259.140:4): avc: denied { mmap_zero } for pid=19225 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect ATL1E 0000:09:00.0: enabling device (0000 -> 0003) ATL1E 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:09:00.0: setting latency timer to 64 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI: WMI: Mapper loaded acer-wmi: Acer Laptop ACPI-WMI Extras acer-wmi: Brightness must be controlled by generic video driver cfg80211: Calling CRDA to update world regulatory domain acerhdf: Acer Aspire One Fan driver, v.0.5.13 acerhdf: no Aspire One hardware found cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:07:00.0: enabling device (0000 -> 0002) iwlagn 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 iwlagn 0000:07:00.0: setting latency timer to 64 iwlagn 0000:07:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:07:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:07:00.0: irq 29 for MSI/MSI-X HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 phy0: Selected rate control algorithm 'iwl-agn-rs' input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 cfg80211: Calling CRDA for country: IT cfg80211: Regulatory domain changed to country: IT (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) device-mapper: multipath: version 1.1.0 loaded EXT4-fs (dm-0): internal journal on dm-0:8 EXT4-fs (sda1): barriers enabled kjournald2 starting: pid 20113, dev sda1:8, commit interval 5 seconds EXT4-fs (sda1): internal journal on sda1:8 EXT4-fs (sda1): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda1): mounted filesystem with ordered data mode SELinux: initialized (dev sda1, type ext4), uses xattr Adding 5160952k swap on /dev/mapper/vg_tegamino-lv_swap. Priority:-1 extents:1 across:5160952k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c platform microcode: firmware: requesting intel-ucode/06-17-06 microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c platform microcode: firmware: requesting intel-ucode/06-17-06 Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team iwlagn 0000:07:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:07:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready ATL1E 0000:09:00.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: PROTECTION_ERROR DMA_R_PROTECTION, nStatus: [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 2/4 Class 0x8297 Mthd 0x15e0 Data 0x00000000:0x00000000 [drm] nouveau 0000:01:00.0: magic set 1: [drm] nouveau 0000:01:00.0: 0x00408900: 0x8000003f [drm] nouveau 0000:01:00.0: 0x00408904: 0xffad6fbc [drm] nouveau 0000:01:00.0: 0x00408908: 0xffdbadfd [drm] nouveau 0000:01:00.0: 0x0040890c: 0xc000dcb6 [drm] nouveau 0000:01:00.0: 0x00408910: 0xfc7623ed [drm] nouveau 0000:01:00.0: 0x00408e08: 0x0007fce3 [drm] nouveau 0000:01:00.0: 0x00408e0c: 0x00000000 [drm] nouveau 0000:01:00.0: 0x00408e10: 0x1b7ffa40 [drm] nouveau 0000:01:00.0: 0x00408e14: 0x0000007e [drm] nouveau 0000:01:00.0: 0x00408e18: 0x03829008 [drm] nouveau 0000:01:00.0: 0x00408e1c: 0x14bfdffc [drm] nouveau 0000:01:00.0: 0x00408e20: 0x07277e25 [drm] nouveau 0000:01:00.0: 0x00408e24: 0x0d03027f [drm] nouveau 0000:01:00.0: magic set 2: [drm] nouveau 0000:01:00.0: 0x00409900: 0x0000005f [drm] nouveau 0000:01:00.0: 0x00409904: 0xff727fcf [drm] nouveau 0000:01:00.0: 0x00409908: 0xbfbf777f [drm] nouveau 0000:01:00.0: 0x0040990c: 0xc000d9ff [drm] nouveau 0000:01:00.0: 0x00409910: 0xfd3b3def [drm] nouveau 0000:01:00.0: 0x00409e08: 0x000f682e [drm] nouveau 0000:01:00.0: 0x00409e0c: 0x00000000 [drm] nouveau 0000:01:00.0: 0x00409e10: 0x378e5500 [drm] nouveau 0000:01:00.0: 0x00409e14: 0x000000c4 [drm] nouveau 0000:01:00.0: 0x00409e18: 0x192e4abe [drm] nouveau 0000:01:00.0: 0x00409e1c: 0x8ddeb7f3 [drm] nouveau 0000:01:00.0: 0x00409e20: 0x251d362a [drm] nouveau 0000:01:00.0: 0x00409e24: 0x0b13015d fuse init (API version 7.12) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts wlan0: authenticate with AP XX:XX:XX:XX:XX:XX wlan0: authenticated wlan0: associate with XX:XX:XX:XX:XX:XX wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x471 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec wlan0: no IPv6 routers present CE: hpet increasing min_delta_ns to 33750 nsec -- Asluz. M@file:///home/markino/Dropbox/Public/bootchart_tegamino.png ----------------------------------------------- Non vergognarti di non sapere... vergognati di non voler imparare! "Technology is a word that describes something that doesn't work yet." ~ Douglas Adams -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
![http://dl.dropbox.com/u/313729/bootchart_tegamino.png"](http://dl.dropbox.com/u/313729/bootchart_tegamino.png"){kind=link}
