Germán Racca wrote:
> Hi list:
>
> I need to use ssh to transfer data between a PC and a notebook, both
> with Fedora 11, but the result is, from notebook to PC:
>
>
> $ ssh xx.xx.xx.xx
> ssh: connect to host xx.xx.xx.xx port 22: No route to host
>
> $ ping xx.xx.xx.xx
> >From xx.xx.xx.xx icmp_seq=11 Destination Host Unreachable
> >From xx.xx.xx.xx icmp_seq=12 Destination Host Unreachable
> >From xx.xx.xx.xx icmp_seq=13 Destination Host Unreachable
>
> >From PC to notebook there is no response.
> Please can anybody help me?
It would help a lot if we knew a bit more about the setup. Are *all* the
xx.xx.xx.xxs the same? Are they both on the same wired network? Have you
checked the firewall on whichever one is to be a server to check that it
allows SSH through? If you haven’t chosen a firewall, you might want to
either:
* temporarily run
service iptables stop
to see if the firewall is causing problems
* run system-config-firewall, and ensure that SSH is marked as trusted
* or run
service iptables status | egrep ":22 "
and check that there is an output line. If not, you haven't enabled
SSH through the firewall.
If none of that helps, then I suspect your computers are on different
networks. Can they both access the Internet correctly? What sort of
devices do they use to access the Internet?
Hope this helps,
James.
--
E-mail: james@ | [Alan] finally installed his cuckoo clock on the wall.
aprilcottage.co.uk | For some reason this involved falling over in the dark in
| the garden, but I haven't dared ask about that yet. I
| don't -think- he was trying to catch a cuckoo to put
| inside it, but you never know. -- Telsa Gwynne's Diary
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
