Dear List!
I have F11 machine which shares WEB to small home wired network. F11
computer has 3 ethernet adapters - one built in motherboard (eth0,
'main' adapter) and two additional cards (eth1,2). With grate help of
this list and even greater help of google I was able to set up NAT over
it. It worked perfect while there was only one client in the home
network - window$ laptop, connected to eth1 (eth2 was down). Now I added
second laptop - it runs ubuntu. I turned on eth2 and tried to do the
same trick with it but no lack until now. Here goes mine configuration:
ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:EA:22:A0:2C
inet addr:192.168.0.203 Bcast:192.168.1.255
Mask:255.255.254.0
inet6 addr: fe80::20f:eaff:fe22:a02c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:124015 errors:0 dropped:0 overruns:0 frame:0
TX packets:25838 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21230917 (20.2 MiB) TX bytes:4769745 (4.5 MiB)
Interrupt:19 Base address:0xe000
eth1 Link encap:Ethernet HWaddr 00:80:48:2E:43:9C
inet addr:192.168.2.20 Bcast:192.168.2.255
Mask:255.255.255.0
inet6 addr: fe80::280:48ff:fe2e:439c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11044 errors:0 dropped:0 overruns:0 frame:0
TX packets:9539 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8868181 (8.4 MiB) TX bytes:3991105 (3.8 MiB)
Interrupt:18 Base address:0x8000
eth2 Link encap:Ethernet HWaddr 00:40:F4:98:DB:E9
inet addr:192.168.2.40 Bcast:192.168.2.255
Mask:255.255.255.0
inet6 addr: fe80::240:f4ff:fe98:dbe9/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:75 errors:0 dropped:0 overruns:0 frame:0
TX packets:73 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5935 (5.7 KiB) TX bytes:14586 (14.2 KiB)
Interrupt:19 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:329 errors:0 dropped:0 overruns:0 frame:0
TX packets:329 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:69191 (67.5 KiB) TX bytes:69191 (67.5 KiB)
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.2.0 * 255.255.255.0 U 0 0 0
eth1
192.168.2.0 * 255.255.255.0 U 0 0 0
eth2
192.168.0.0 * 255.255.254.0 U 0 0 0
eth0
link-local * 255.255.0.0 U 1002 0 0
eth0
link-local * 255.255.0.0 U 1003 0 0
eth1
link-local * 255.255.0.0 U 1004 0 0
eth2
default mitht2.imt.ru 0.0.0.0 UG 0 0 0
eth0
sysctl net.ipv4.ip_forward
net.ipv4.ip_forward = 1
iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
MASQUERADE all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
cat /etc/sysconfig/iptables
# Generated by iptables-save v1.4.3.1 on Tue Sep 1 23:36:23 2009
*nat
:PREROUTING ACCEPT [1264:158963]
:POSTROUTING ACCEPT [96:14688]
:OUTPUT ACCEPT [462:49878]
-A POSTROUTING -o eth0 -j MASQUERADE
COMMIT
# Completed on Tue Sep 1 23:36:23 2009
# Generated by iptables-save v1.4.3.1 on Tue Sep 1 23:36:23 2009
*filter
:INPUT ACCEPT [7849:1116249]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [1219:189475]
-A FORWARD -i eth0 -j ACCEPT
-A FORWARD -i eth1 -j ACCEPT
-A FORWARD -i eth2 -j ACCEPT
COMMIT
# Completed on Tue Sep 1 23:36:23 2009
Window$ laptop has 192.168.2.30 address and uses 192.168.2.20 (eth1 IP)
as gateway. DNS is the same as on F11 machine.
I've tried to set up 192.168.2.50 as IP for ubuntu laptop with default
gateway of eth2 IP address: 192.168.2.40. It doesn't work. When I'm
trying to ping 192.168.2.50 from F11 the result is:
ping 192.168.2.50
PING 192.168.2.50 (192.168.2.50) 56(84) bytes of data.
From 192.168.2.20 icmp_seq=2 Destination Host Unreachable
From 192.168.2.20 icmp_seq=3 Destination Host Unreachable
From 192.168.2.20 icmp_seq=4 Destination Host Unreachable
^C
As I can understand packets go from wrong IP. Namely, from eth1 when I
would like them to go from eth2.
How to fix that?
Thank you for your attention!
Respectfully
--
Hiisi.
Registered Linux User #487982. Be counted at: http://counter.li.org/
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
