Thanks This is the info ------------- eth0 Link encap:Ethernet HWaddr 00:19:99:0D:CC:14 inet addr:77.78.8.89 Bcast:77.78.8.89 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:509 errors:0 dropped:0 overruns:0 frame:0 TX packets:473 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:72383 (70.6 KiB) TX bytes:195760 (191.1 KiB) Interrupt:23 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) ------ I am trying to configure a dedicated hosting server On Thu, Aug 27, 2009 at 8:46 PM, Clint Dilks <clintd@xxxxxxxxxxxxxxxxxx> wrote: > > online.service.com@xxxxxxxxx wrote: >> >> Thanks all, >> >> I will have two static ips as 77.78.8.111 and 77.78.8.89 >> >> I will have this configure: >> >> >> DEVICE=eth0:0 >> BOOTPROTO=static >> IPADDR=77.78.8.111 >> BROADCAST = ??????? >> NETWORK=???? >> NETMASK=255.255.255.0 >> TYPE=Ethernet >> ONBOOT=yes >> >> >> and >> >> DEVICE=eth0:1 >> BOOTPROTO=static >> IPADDR=77.78.8.89 >> BROADCAST = ?????? >> NETWORK=???? >> NETMASK=255.255.255.0 >> TYPE=Ethernet >> ONBOOT=yes >> >> >> >> What value would for BROADCAST and NETMASK ? >> >> >> >> Thanks again >> >> On Thu, Aug 27, 2009 at 8:12 PM, Clint Dilks <clintd@xxxxxxxxxxxxxxxxxx <mailto:clintd@xxxxxxxxxxxxxxxxxx>> wrote: >> >> online.service.com <http://online.service.com>@gmail.com >> <http://gmail.com> wrote: >> >> Hi all, >> >> I like to add an extra ip address to my fedora server. But >> here is my ifcfg-eth0 file in under >> /etc/sysconfig/network-scripts directory >> >> DEVICE=eth0 >> BOOTPROTO=dhcp >> TYPE=Ethernet >> ONBOOT=yes >> >> there is no IPADDR field. Where possibly i can find "IPADDR" >> gets defined? >> >> >> Thanks! >> >> This indicates you are getting an address via DHCP. >> >> In order to setup a second interface you can either use >> system-config-network and look at setting up an alias. Or manually >> convert >> >> //etc/sysconfig/network-scripts/ifcfg-eth0 to >> /etc/sysconfig/network-scripts/ifcfg-eth0:0 and >> /etc/sysconfig/network-scripts/ifcfg-eth0:1 making sure that the >> files contain the information that you need. >> >> The Link below seems to be a good example of what needs to be done. >> >> http://www.xenocafe.com/tutorials/linux/redhat/bind_multiple_ip_addresses_to_single_nic/index.php >> >> >> /// >> >> -- fedora-list mailing list >> fedora-list@xxxxxxxxxx <mailto:fedora-list@xxxxxxxxxx> >> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list >> Guidelines: >> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines >> >> > Hi, > > What I suggest you do is have your system configured as it was via DHCP and then use the command ifconfig eth0 to see what the broadcast and network are being set to. Then modify your configuration to match. > > Ideally if you don't understand this already you should talk to the person who setup the DHCP server on your network to make sure you are doing things correctly. If the DHCP server is being provided by a home router that no one has set up for you previous and you move to static addresses it is likely that you will have to configure NAT manually on your home router to get things working correctly. > > Good Luck > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
