Sam Varshavchik wrote:
Stuart McGraw writes:
NetworkManager too wants a device to talk to, with /dev/modem
being the default but since there is no such device (nor anything
I see that looks like it would be an emulated serial device that
talks to the pci modem card), I wasn't able to do much with that.
If, as you say, it's a real modem, it should show up as an ordinary
serial device, which would be /dev/ttyS<n>. Standard serial port devices
are /dev/ttyS0 through /dev/ttyS3. Any PCI cards that add additional
serial devices would probably come up as /dev/ttyS4, and so on.
Also, check the kernel boot messages, with dmesg, for any reference to
your modem card.
Yes, see if there's a /dev/ttyACM* device. My USB-based USR modem gets
set up as /dev/ttyACM0.
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer ricks@xxxxxxxx -
- AIM/Skype: therps2 ICQ: 22643734 Yahoo: origrps2 -
- -
- Silence! Or I shall replace you with a very small shell script! -
- - The Wizard of OS -
----------------------------------------------------------------------
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
