Am 11.07.2009 20:00, schrieb Anthony Messina:
in my xinetd, my service file is "sane-port" not just "sane"
(/etc/xinetd.d/sane-port)
not sure if you're using tcpwrappers or not, but you may need the following in
/etc/hosts.allow
sane-port: 192.168.2.0/255.255.255.0
saned: 192.168.2.0/255.255.255.0
and in /etc/sane.d/dll.conf, the "net" must be uncommented.
you may also need to expand your sane-port xinetd service definition. mine
looks like:
service sane-port
{
disable = no
port = 6566
socket_type = stream
protocol = tcp
wait = no
user = nobody
group = nobody
server = /usr/sbin/saned
only_from = 192.168.2.0/24
bind = 192.168.2.3
flags = IPv4
}
it all works here. -a
Thanks, Anthony,
I've tried your suggestions one after the other, but still no success:
- rename service file
- adding lines to hosts.allow (I don't use tcpwrappers anyway)
- "net" was already uncommented in dll.conf
- using you service file (with bind=192.168.2.35, which is my host's ip)
Klaus
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
