> After the raid controller verifies the DMI pool it stops, ie. I do not > see the grub menus. I booted into rescue mode and the file systems > appears to be good. I did a complete reinstall again and have the same > results. > > You did make the /boot partition ext3, not ext4, right? I have this: a non raid disk and two mirrored disks controlled by an LSI MegaRaid card. The system is on the non raid disk and I'm able to boot. If I wanted to boot off of the raid array I believe I had to tell the raid controller to make the array bootable (I believe). Not sure 100% because I'm booting off of the non raid disk so I didn't pay much attention, I just remember seeing that in the controller bios. Do you have to do that on the 3Ware? If you have a spare disk, you may want to connect it to the motherboard, install the system, or at least the /boot partition (as ext3) on that disk and boot. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
